“An Error Occurred on YouTube, Please Try Again Later” It’s not uncommon to run into a YouTube issue. Despite the operating system or web browsers utilized. The playing resumes after 30 seconds, and you can watch the desired video, but this is still an annoyance. There are a kind of causes for this error, as well as a kind of solutions.
You should keep in mind that YouTube Video is a viral video-sharing website. It receives millions of visitors each day. It’s not surprising that it occasionally encounters a problem. If the message “YouTube an Error Occurred, Please Try Again Later” shows on YouTube video. It means that something went wrong. Restart the PC device to see if that fixes the problem.
Causes of ‘YouTube an error occurred: playback Id” Error?
There are multiple reasons why this YouTube error occurs. YouTube, playback error ID issue, still affects devices. It prevents users from viewing web content. According to my research, several common conditions could result in this error message:
- Files In Your Browser Have Been Corrupted.
- This problem could be caused by missing or corrupted browser files. It can occur as a result of data that has been incorrectly cached. Reinstalling the browser should solve the problem in this scenario.
- DNS Data That Has Been Cached Incorrectly.
- The DNS Resolver Cache stores material that obstructs outgoing connections. If this scenario can be applied, clearing the DNS cache will solve the problem.
- Automatic DNS causes the Problem.
- An automated DNS assigned by the ISP was the culprit that was causing the problem. Using Google’s Public DNS for your connection is a better option that may also solve the problem.
- A Change Has Been Made To The Internet Connection.
- This specific YouTube problem has been linked to Dynamic IP setups. Restart the router or modem. Allowing the network connection configuration to refresh on its own is a solution.
Solutions To Fix “YouTube An Error Occurred, Try Again Later” On YouTube
- Reinstall Your Current Browser
- Restart Your Network Connection Device
- Changing Your DNS Google’s Public DNS
- Flush DNS Cache Of Your Network
- Switch Accounts On your Browser
- Use Incognito Mode In Browser
- Disable And Enable YouTube Autoplay
- Disable Browser Extensions
- Clear Cache Files and Data Of The Browser
- Disable Hardware Acceleration
- Ensure Cookies Are Enabled In Browser
- Change The Video Resolution
- Perform A System Restore
- Check Audio Drivers
- Switch To A Different Browser
1. Reinstall Your Current Browser
Solve the YouTube error message. “YouTube An Error Occurred, Try Again Later: playback Id” on YouTube videos.” Sometimes corrupted browser files cause YouTube to respond inadequately while playing video.
- To launch the Run dialogue box, press the Windows key + R key. Then, enter the Programs and Features box, type “appwiz.cpl” and hit Enter.
- Scroll through the list to find the browser that’s creating the “An error occurred” message.
- When you find it, right-click it and select Uninstall.
- Remove the browser by following the on-screen instructions.
- Delete any cached data or user settings as well.
- Restart your computer after you’ve uninstalled your browser.
- To reinstall a previously removed browser, use Microsoft Edge.
- To reinstall the browser, run the installation program and follow the instructions.
2. Restart Your Network Connection Device
Please try to open a new page in your browser. Restart your network Connection device to see if it will load. Please restart your network device if you are unable to access the website. It will solve “YouTube an error occurred, Please Try Again Later.”
- Simply hit the Power button to restart your network device.
- Before turning it back on, wait about a minute.
- Please try playing the same video on YouTube after your device is connected to the network.
Wait until the connection is restored after restarting your modem. Check whether the “YouTube An Error Occurred, Please Try Again Later: playback Id” same error message persists.
3. Changing Your DNS Google’s Public DNS
The “YouTube an error occurred” was resolved after switching the DNS. The default to Google’s Public DNS to the Google Public IP addresses. You’ll need to alter the DNS settings in your operating system directly. Depending on your Windows version, the procedure will differ slightly.
To update your current DNS to Google’s public domain name server, follow the steps below.
- To launch the Run dialogue box, hold the Windows key + R key. Then, to open the Network Connections box, type “ncpa.cpl” and hit Enter.
- Choose the connection for which you want to use Google Public DNS.
- Right-click Wi-Fi and select Properties from the drop-down menu.
- Instead, right-click on Ethernet (Local Area Connection) to create an Ethernet connection.
- Now navigate to the Networking tab and the settings box.
- Then, under the Properties tab, select Internet Protocol Version 4 (TCP/IPv4).
- Go to the General tab now. Then, select the toggle that corresponds to Replace the following values with the following DNS server addresses:
- Preferred DNS server: 22.214.171.124
- Alternate DNS server: 126.96.36.199
- Repeat with Internet Protocol Version 6 (TCP/IPv6) after saving the changes.
4. Flush DNS Cache Of Your Network
Many browser-related difficulties can be resolved by flushing your DNS cache. The problem was no longer present for YouTube videos, according to users. It is typically used when the badly cached DNS data appears in several browsers.
- To resolve the “YouTube, An Error Occurred, Please Try Again Later: playback Id” error message, clear your DNS cache.
- To launch the Run dialogue box, press the Windows key + R key. Then, as an administrator, type “cmd” and launch Command Prompt.
- To flush your DNS cache, execute the following command. Do it in the elevated Command Prompt and press Enter.
- It will clear the DNS cache of all information. Then it needs your computer to look for new DNS information.
Open a YouTube video before the displayed error. The “YouTube An Error Occurred, playback Id” error message. Check to see if the “YouTube An Error Occurred, Please Try Again Later: Playback Id” error has been solved.
5. Switch Accounts On Your Browser
It wasn’t a problem with the browser or the PC. The problem could be caused by the user’s Google Account being used to sign in to Chrome. To fix this issue, I’ll show you how to switch your Google Account.
- To start, begin with a new tab in your browser.
- On the far right of your screen, click the “Account” tile, which displays your username’s first initial.
- To add another account to the browser, select the “Add Another Account” option and follow the on-screen directions.
- Open a YouTube video with the same account to test if the problem still exists.
- Toggle the “Autoplay” toggle once to disable it, then once more after some time to re-enable it.
6. Use Incognito Mode In Browser
Using Incognito browsing mode on the browser fixed the problem. This setting disables several of the browser’s tracking features. It appears to be a simple workaround that stops browsing history from being recorded.
- You’ll need to take the following steps to enable it:
- Right-click on the Google Chrome shortcut menu icon.
- From this menu, select the Properties option.
- Add “-incognito” after the text is put inside the “Target field” in the Google Chrome Properties window.
- Then press the Apply button. To keep your settings, click the OK key.
- Alternatively, press the “Ctrl+Shift+N” keys on the keyboard to open Incognito Mode.
7. Disable And Enable YouTube Videos Autoplay
Many people claim that removing and re-enabling the YouTube page autoplay feature fixes the problem. So, to resolve this issue, take the following steps.
- Go to YouTube and watch any video of your choice.
- You can find the “Autoplay” option on the video player of YouTube video.
- If autoplay is enabled after the video has been opened, turn it off. If it’s turned off, turn it on.
- Reload the website and repeat the procedure, then restart your Chrome browser.
- Check to see if the issue persists.
8. Disable Browser Extensions
Some extensions may block YouTube videos from performing certain functions. This error may be triggered as a result of it. I’ll demonstrate how to disable extensions.
- Click the “Three Dot Marks” at the top right corner of Chrome.
- Select “Extensions” from the drop-down menu under the “More Tools” option.
- To disable superfluous extensions and ad blocker extensions, click the “Toggle” button.
- After disabling these extensions, see if the problem still exists.
9. Clear Cache Files and Data Of The Browser
To repair If you receive an error message that says “Please try again later,” you should erase your cookies and cache. Follow the procedures given below to do this with Chrome.
If you use any browser plugins, you should make sure they’re up to current.
- Select “Settings” from the “Menu” drop-down menu.
- Scroll down to the “Site settings” button under the “Privacy” item in the settings menu.
- To see all cookies and site data, go to “Cookies” and then “See all cookies and site data.”
- Now type the website’s name into the search bar.
- To clear all cached data from that website, click the “Remove All” button.
- The data will be destroyed if you answer “yes” to the question.
10. Disable Hardware Acceleration
Hardware acceleration has been noted to cause problems with YouTube videos. The steps below will show you how to turn it off in Chrome.
If you need to use a different browser, you should be aware that you may stop hardware acceleration in any browser in the same way. Hardware acceleration can result in a variety of problems. The issues with YouTube videos should be fixed after disabling them.
- Select “Menu” then “Settings” after launching Chrome.
- Pick the “Advanced” tab option at the bottom of the page.
- Change the “Use hardware acceleration when available” on or off in the “System” section as appropriate.
11. Ensure Cookies Are Enabled In Browser
- Launch Chrome.
- To access the menu, click the three dots in the top right corner of the Chrome window.
- Select “Settings” from the menu.
- Scroll down the Settings page. You’ll need to expand the advanced settings if you can only see a few options that end at a section labeled “On startup.”
- At the bottom of the screen page, click “Advanced option.”
- To see more settings, select “Advanced” if you don’t see the Privacy and security controls.
- Pick the “Content settings” in the Privacy and Security section.
- Select “Cookies” from the drop-down menu.
- Ensure to “Allow sites to save and read cookie data” switched “on” in the Cookies page. To make the switch blue, slide it to the right.
- In Chrome, cookies are now enabled. You can always come back here to turn them off or tweak Chrome’s cookie handling.
12. Change The Video Resolution
Change the “errored video’s” video quality. Simply pause the YouTube video and select one of the YouTube videos resolution options (720p, 360p, 480p, 240p). Then, by pressing the Play button again, try to play the video.
- Select settings on PCs to modify the video quality while watching.
- Then select the quality option.
- Now you may choose your favorite quality, such as auto, higher picture quality, data saver, and advanced sets.
13. Perform A System Restore
This issue is caused by a lossy codec that was recently installed on your machine. Use the System Restore process to restore your computer to a previous state. Using a System Restore point, I was able to fix the Playback ID problem.
- To launch the Run dialogue box, hold the Windows key + R key. Then, to enter the System Restore wizard, type “rstrui” and click Enter.
- At the window of the System Restore procedure, select Next.
- Begin by checking the option labeled “Show more restore points” on the screen.
- Select a system restore point. The time when you first encountered this problem. Then, to proceed, click Next.
- To begin the restoration process, click Finish, then Yes at the confirmation screen. After that, your computer will restart, and the previous state will be applied at the next startup.
14. Check Audio Drivers
The Device Manager in Windows 10 is a system utility that keeps track of all the installed drivers. It allows users to browse, delete, reinstall, and even search for the most up-to-date driver. Follow these steps to update drivers using the device manager:
- In the taskbar’s search box, type “Device Manager” and select the top result. A list of all the drivers in your system will open.
- Look for “Sound, Video, and Game Controller” as an option. To reveal the list beneath it, click on it to enlarge it.
- Double-click on the audio driver you want to use. There will be a new window open. Select the Drivers tab.
- Pick “Search Automatically for Updated Driver” after clicking the Update button.
- It will look for updated drivers for your product on the internet and install them.
- Alternatively, Go to the official website of your audio manufacturer.
- Obtain the required edition.
15. Switch To A Different Browser
If nothing else appears to work and the issue persists, try switching to a different browser. Few users have noted that this issue isn’t present in all web browsers. Try switching to another one until your current one is updated. The Opera and Mozilla Firefox browser is recommended. It is secure, quick, and includes a built-in free VPN. It can help you maintain your online anonymity at all times.
With the solutions listed above, you can easily handle the error. “YouTube An Error Occurred, Playback Id. error. Simply follow the techniques outlined. If none of the methods works, the issue is at the YouTube end. Just wait while it gets resolved by YouTube.
How Do You Fix “YouTube Error Occurred Please Try Again Later”?
Users can often resolve the ‘error occurred, try again later’ issue on YouTube. Upgrade your Internet, web browser, flash player, or clear your cache and cookies. One of those will undoubtedly solve the problem. Finally, you’ll be able to watch your YouTube videos without interruption.
Why Is “YouTube Error Occurred, Please Try Again Later”?
YouTube When searching, an error occurred. While looking for videos on YouTube, users noticed this issue. Most likely, this is a bug that can be fixed by restarting your browser. You may be capable of resolving the issue by emptying the cache or altering the video quality.
Why Does YouTube Keep Saying Error Occurred?
An error notice may appear on your device if YouTube cannot perform the action you’ve taken. Many things are beyond YouTube’s control. Insufficient RAM on your device or a terrible internet connection. “Please verify your internet connection,” for example, is a standard error message.
What Does 400 That’s An Error Mean?
The status code is 400 Bad Request for the HyperText Transfer Protocol (HTTP). It means that the server is unable to or unwilling to process the request. As a result of it appears to be a client error.