8 Fixes For Xbox One Won’t Turn On But Beeps

Xbox One S won’t turn on but beeps” problems are relatively common, and some of them can be swiftly resolved by following a few simple procedures. If there is no hardware defect, the “Xbox One won’t power on but beeps” issue can also be resolved.

8 Best Ways To Fix Xbox One S Won't Turn On But Beeps

Because there are numerous causes for”Xbox One S Won’t Turn On But Beeps,” the remedies to the problem vary. Several common Xbox One won’t turn on issues will be discussed, and possible remedies.

Why Does Microsoft “Xbox One Won’t Turn On But Beeps” Occurs? 

The following reasons are the most common that prevent the console from starting up.

Faulty Power Brick And Cable

To see whether the issues are resolved, consider swapping the power brick and cable.

Console Overheating, Dust, And Vents Issue

Console Overheating, Dust, And Vents Issue

Overheating the console is one of the most common causes of booting issues. It is most common to play Xbox One games regularly or when your Xbox is left on for long periods.

If you believe your console is overheating, all you have to do is unplug it from the outlet. Before turning it on, wait a few seconds (10-20 seconds) and plug it back. Ensure to have proper ventilation near Xbox one.

Faulty Motherboard

faulty motherboard

The presence of fluids on the Xbox motherboard could also be a factor. Liquid can harm the motherboard, causing problems with startup.

As a result, your Xbox One will turn on for a few seconds before turning off. So, if this problem persists, have it corrected by a qualified professional.

Faulty Internal PSU

The Xbox One has an internal power supply that does not provide the essential burst during the initial boot. As a result, the Xbox One beeps but won’t power on.

You have the option of having the problem addressed or having it replaced by the firm. The cost of a new Xbox is substantially more than a used Xbox.

Solutions To Fix Xbox One S Won’t Turn On But Beeps Issue

  1. Press The Eject Button Repeatedly
  2. Reset The Internal Power Supply
  3. Remove The USB Ports Devices And The External HDD
  4. Press Sync, Eject, And Power Buttons Simultaneously
  5. Insert A Disc In The Xbox One
  6. Power Cycle Xbox
  7. Use A Different Power Outlet
  8. Recheck Power Cable And Power Brick

1. Press The Eject Button Repeatedly

Press The Eject Button Repeatedly

It may appear weird, but it has assisted a significant number of people in resetting the internal software and getting the Xbox back on track.

  • Simply push and hold the Eject button for 10 seconds.
  • You do not need to have a disc in the tray when attempting this option.
  • The goal is to get the software to focus on something new, such as ejecting the disc tray. You could try simply inserting a new disc.
  • This might be enough to interrupt the program cycle and refocus the components on a new task: reading the disc, you just inserted.
  • Now, check if the “Xbox One S won’t turn on but beeps” issue is fixed or not.

2. Reset The Internal Power Supply

Reset The Internal Power Supply
  • Unplug your Xbox’s power cord and wait about 10-15 seconds. 
  • Reconnect the cord and press the power button to complete the process. 
  • Your Xbox may start up usually.
  • Now, check if the “Xbox One S won’t turn on but beeps” issue is fixed or not.

3. Repair The USB Ports Devices And The External HDD

While the Xbox is turned off, disconnect all USB cables and an external hard drive (if you’re using one). It should be able to start on its own. Once it boots up regularly, you can reconnect the USB cords and the HDD.

  • Unplug the external HDD and all USB devices when the console is turned off.
  • Wait a few moments after pressing the power button.
  • You can attach the external HDD and USB devices once the console has booted normally.
  • Now, check if the “Xbox One S won’t turn on but beeps” issue is fixed or not.

4. Press Sync, Eject, And Power Buttons Simultaneously

This approach works in the same way as pressing the CTRL+ALT+DLT keys on your computer. However, because this is a problematic remedy, you’ll need to follow all of the steps for it to work.

  • To begin, hold down the sync, eject, and power buttons for a total of 10 seconds.
  • Release the eject button after 10 seconds and wait 15 seconds before releasing all the buttons.
  • If it still does not boot up, hit the power button once more and long-press the sync button.
  • While holding the power button, press the sync button a few times. After that, your Xbox should be able to boot correctly.
  • Now, check if the “Xbox One S won’t turn on but beeps” issue is fixed or not.

5. Insert A Disc In The Xbox One

If you don’t already have a disc in your Disc Drive, this method will work. 

  • Turn on your Xbox and partially insert a CD into the disc drive slot when it is turned off. 
  • When the beeping begins, gently insert the CD into the disc drive, and the Xbox should recognize it and switch on.
  • Now, check if the “Xbox One S won’t turn on but beeps” issue is fixed or not.

6. Power Cycle Mode Xbox One

It is the most popular and straightforward approach for getting your Xbox One mended. Here’s how to power cycle your Xbox One step by step:

  • Connect the cord to the outlet and turn on the power.
  • For around 10 seconds, press and hold the power button on your console.
  • The reset process will commence after this.
  • You will now notice that your console is turning off.
  • The power brick’s blink will change from orange to white.
  • When the power brick becomes dark orange, you’ve completed your power cycle.
  • Now, check if the “Xbox One S won’t turn on but beeps” issue is fixed or not.

7. Use A Different Power Outlet

Connect the Xbox One S console to a different power outlet and turn on the Xbox if using a power strip. A power strip with numerous appliances connected to it may not supply the initial burst of power required.

Now, check if the “Xbox One S won’t turn on but beeps” issue is fixed or not.

8. Recheck Power Cable And Power Brick

Recheck Power Cable And Power Brick

If the power cable or power brick is damaged, your Xbox One will most likely not switch on but will beep. You will be unable to reset your Xbox console due to bent wires and a damaged plastic casing on the brick.

  • Check your power cable or power brick with a different one to see if it works.
  • Take your power supply to a friend who uses an Xbox One and see if their console isn’t working as well as yours.
  • In this situation, you’ll need to replace your entire power set.
  • Now, check if the “Xbox One S won’t turn on but beeps” issue is fixed or not.

Conclusion

You may try a few different options before finding one that works. I’ve listed all the tried and true solutions that are usually successful in fixing the “Xbox One S won’t turn on but beeps” issue. If none of the suggestions work, it’s time to upgrade your Xbox.