Why computer keeps restarting on boot in Windows 10
A lot of users have complained of the error Windows is stuck on restarting. It dominantly happens when your system gets into a restart loop. Due to this, the system continues to do the same task repeatedly.Â
And this could happen due to lots of reasons. It can be improperly installed windows systems, outdated or damaged drivers, failed programs, missing system components, or ill-configured devices.
Solutions to fix Windows 10 PC Stuck On Restarting issue:
- End Process of Failed Programs in Task Manager
- Run System Maintenance Troubleshooter
- Run Startup Repair
- Regenerate the SoftwareDistribution Packages in Windows Update
- Install Latest Windows 10
- Disable Fast Startup
- Update your device drivers
- Update your BIOS
- Rollback to the Previous Version of Windows
Solution 1. End Process of Failed Programs in Task Manager
Failed programs might be an issue in causing your windows stuck while updating the new updates. And can be fixed by removing all the failed programs, and to do it, follow the steps below:
- Click on Ctrl + alt + delete.
- Now, the screen will disappear, and you will see the task manager option on it.
- It will reveal all the failed program’s processes of hanging.
- End all and restart your computer. Restarting will recover your computer.
Now, check if the Windows 10 update is stuck on restarting the issue is fixed or not. If not, proceed with the next step.
Solution 2. Run System Maintenance Troubleshooter
Running the system maintenance troubleshooter could help in this case. For running the system maintenance troubleshooter on your device, follow the steps below:Â
- Open Control Panel and select troubleshooting.
- Click on view all from left and open the system maintenance option as administrator from the list and go to the advanced options.
- Uncheck the Apply repairs automatically and click next.
- Now, follow all the instructions which are on the screen. And wait for troubleshooting to complete.
Solution 3. Run Startup Repair
- First, install all media like your empty USB flash drive, and DVD, and after the installation process, restart your system.
- If you are working with a USB drive, DVD, or CD, press any key to boot the CD to the DVD that you will see on the screen. And now follow all the instructions given on it.
- Select your appreciation languages and move on.
- Click on the repair your computer option.
- You will see an option to choose an option screen.
- Go, select it and then click on the troubleshoot option.
- Click on startup repair from the advance option.
- Once done doing all the processes, restart your system to know whether your problem is solved or not.
Solution 4. Regenerate the SoftwareDistribution Packages in Windows Update
- Follow the same step from 1-5 that you have followed in the above solution. But rather than choosing startup repair this time. Choose the command prompt.
- Input net stop wuauserv and click on the enter button.
- Through this step, you will be able to stop the updating services running in the background.
- Now, input cd %systemroot% and hit enter.
This command will navigate the command prompt to the installation directory of the Windows OS.
Next, input ren SoftwareDistribution SD.old and press enter. By this command, the OS will rename the SoftwareDistribution folder to SD.old for a backup.
If anything goes wrong, you can just go to the C:\WINDOWS\SoftwareDistribution and modify it to its original name.
Input the net start wuauserv again and hit enter. Through this command, you can restart the update service to enable the update on your PC.
Doing this will fix the issue for 80% of users. But if this does not help you, please continue doing the next steps.
Solution 5. Install Latest Windows 10
Command your user drive and attach it to your machine for system backup. Now you will be required to download the MiniTool Partition Wizard Pro Edition to continue performing this solution.
To download the MiniTool Partition wizard pro edition, click here.
- From there, launch Bootable Media Builder through mini tool software.
- Now choose WinPE-based media with MiniTool plug-in to proceed with the further steps.
- Choose the USB flash drive option from the option and click yes to confirm.
Note: – Make sure it does not contain any essential files as this will clear all the data in that drive.
- Then click on the yes to continue and finish button after the successful burning.
- Now, perform a hard shutdown and connect the error prompt device to MiniTool bootable media.
- Enter the BIOS for changing the boot order to the USB device over the hard drive.
- When you restart your system, you will get to see the partition wizard interface.
- Now select the device disk and select the copy disk.
- You need to select the target disk now. Select it, and click Next. You might see a warning on your screen click yes to proceed.
- Confirm the modifications you have made or, you can also change the partition size according to your requirement and click next.
- Click finish and select apply.
Once MiniTool has done processing all the required changes. You may install the latest Windows using the Windows installation media. It will fix your issue from the root. But if you face the same error, try doing the below steps.
Solution 6. Disable Fast Startup
Here is how you can disable the Fast Startup on your computer, follow the steps below:
- Open Run the application and enter powercfg.CPL in the input window.
- Choose what the power buttons do and select change settings that are currently unavailable.
- Save changes before you turn off the box. And set the fast startup as unchecked.
- Close the window and reboot your pc and check the effects.
Check the computer if the error, Windows is stuck on restarting solved or not. If not, move to the next fix.
Solution 7. Update your device drivers
Outdated drivers cause a lot of programs to fail and behave incorrectly. It is better to update the device drivers to avoid getting any errors.
For updating the device drivers, you can use the driver easily. It is an excellent tool for downloading suitable drivers for our system automatically.
- Download and install the driver easily on your PC.
You can download the Driver Easy application for your device.
- After that run, launch the application and then click on the scan option. It will scan your pc and let you know of any problems or device driver updates that are available.
- If you want the application to install the drivers automatically. Click on update all options, and it will automatically install the correct version of all the drivers that are missing from your system.
- Now, restart your system and check the changes.
Solution 8. Update your BIOS
- Hold the Windows logo key (Windows power button) + R to open the Run application and copy-paste msinfo32 into the box. And click on the enter button. From there you can check all the details of your windows system and also the BIOS setup.
- Now, go to the manufacturer’s official website for information on the BIOS.
- Check out the support service in the search bar and search for the latest version of the BIOS update.
- Download the file and install it.
- To check it, restart your PC.
See now if this fixed your issue.
Solution 9. Rollback to the Previous Version of Windows
- If your system is Unplugged, then plug in and press the Next button.
- Now, go to Start and search for recovery in the search bar.
- Select the recovery option from the system settings.
- Select go back to windows option under-recovery option where you can select the previous version of Windows.
- Go back to the screen and press next.
- And click go back to Windows 10.
- Now, follow all the instructions and complete all the processes.