15 Fixes For WiFi Network Not Showing Up Issue

We will tell you how to fix wifi network not showing up issue. It is relatively normal for us to connect our gadgets to a Wi-Fi network to access the internet. However, if you cannot locate your wireless network, you may be unable to join at all.

While some Wi-Fi networks can be concealed from view, you may be unable to locate your network if you are out of range or your device or wireless router is broken.

How To Fix the "Wifi Network Not Showing Up" Issue?

It could be one of several issues with your wireless network if you can’t connect to the internet. Your Wi-Fi isn’t showing up when you try to connect a device is a serious issue, but it can be resolved.

Methods To Fix Wifi Network Not Showing Up Issue

  1. Enable The Wifi Service
  2. Reset The Network Adapter
  3. Switch Wireless Network Mode
  4. Update Wifi Network Driver
  5. Restart The Modem And Wifi Router
  6. Turn On Wlan Autoconfig Service 
  7. Enable SSID Broadcast For Wifi
  8. Check The Device Interference
  9. Temporarily Log Out Of Windows
  10. Use The Network Troubleshooter
  11. Disable IPV6 Protocol
  12. Reset TCP/IP
  13. Obtain New IP Settings
  14. Change the WiFi Channel on the Router
  15. Temporarily Disable Windows Firewall

1. Enable The Wifi Service

The issue occurs most likely due to your Windows disabling the WiFi service. If your Windows blocks WiFi, you won’t be able to connect. So, if you want to enable WiFi service, attempt these procedures. You can look in two different places.

With The Wifi Switch Turned On, Enable The Wifi Service.

  • While completing the procedures below, ensure you’re inside the WiFi network’s range.
  • Some laptops, such as those from HP, Lenovo, and Dell, contain a button or a key on the keyboard that you may use to turn on or off WiFi (such as Fn+F5). Turn on your WiFi service by checking the switch or keypad.

Examine Your Network Configuration.

  • You can check your Wi-Fi switch system if your laptop or computer does not have one.
  • Open Network and Sharing Center, just right-click the Internet icon at the taskbar.
  • Change the adapter settings by clicking the Change adapter settings button.
  • Enable WiFi by right-clicking WiFi. When you right-click on WiFi, you’ll find Disable if enabled.
  • Restart your computer and rejoin your wireless network.

2. Reset The Network Adapter

Resetting the Wi-Fi network adapter is the first attempt because it usually cures the problem.

  • Select View network status and tasks in the Network and Internet area of the Windows Control Panel.
  • In the left panel, select Change adapter settings.
Change adapter settings
  • This will display a list of all network adapters on your computer. This list can be found in the left pane. Right-click on the active Wi-Fi adaptor that you’re using. From the menu, choose Disable.
disable wifi
  • Any cached data will be erased, and you will be completely disconnected from any network. Wait a full minute before repeating the process. Select Enable from the menu this time.
  • When you choose the Wi-Fi icon in the taskbar, the active network you couldn’t see previously should now appear.
See also  Learn How To Open CRDOWNLOAD File On Windows

3. Switch Wireless Network Mode

In Windows 10 PC “wifi network not showing up” issue occurs if the router that runs the network doesn’t provide a network that your Wi-Fi adapter supports.

  • Select the option “Change adapter settings” from the drop-down menu. Select Properties from the right-click menu for your Wi-Fi adaptor. Select the Configure button in the Wi-Fi Properties window.
Switch Wireless Network Mode Configure
  • Select the Advanced tab, then Wireless Mode in the Property panel, and select the wireless mode from the Value dropdown.
Advanced tab
  • If your Wi-Fi adapter has numerous modes listed in this menu, choose the one with the most options.
  • Your adapter will now be able to “see” networks that use any of these modes. When you’re finished, select OK.

4. Update Wifi Network Driver

You can also upgrade your WiFi network adapter driver using Device Manager on your Windows 10 device.

  • Press the Windows symbol key and R on the keyboard to open the Run box.
  • Then, type “devmgmt.msc” and hit Enter on your keyboard.
devmgmt.msc
update driver

5. Restart The Modem And Wifi Router

If the problem occurs on your WiFi network at home, you can also check the WiFi itself to see if it’s a router problem, SSID broadcast, or device interference.

This issue is most likely driven by an issue with your Internet Service Provider (ISP). You can reconnect to your ISP by restarting your modem and wireless router.

  • Remove the power cords from your wireless router and modem (remove the battery if the modem has a battery backup).
  • Allow at least 30 seconds to pass.
  • Reconnect the wireless router and modem to the power source (put the battery to the modem).

6. Turn On WLAN Autoconfig Service 

Wireless security and connectivity settings can be configured using the WLAN AutoConfig service. When WLAN AutoConfig is enabled, the settings are applied to all IEEE 802.11 wireless network adapters on your computer.

Furthermore, when WiFi is accessible, it will automatically connect to a favorite wireless network. To enable it, take the following steps:

  • To open the Run box, press the Windows logo key + R at the same time on your keyboard, then type services.msc and hit Enter.
 services.msc
  • Right-click WLAN AutoConfig option (or Wireless Configuration if you’re using Windows XP) and select Properties.
Wlan AutoConfig option
  • Select Automatic as the Startup type, then Apply and OK.

7. Enable SSID Broadcast For Wifi

The Service Set Identifier (SSID) broadcast makes your WiFi network available to your network adaptor. Your WiFi network will no longer appear in the list once you disable SSID broadcast.

For security reasons, many users disable SSID broadcast. They can hide the WiFi network, and the network name will not be visible to others.

However, you’ll have to manually establish the profile settings, including the network name and security mode, when you connect to the WiFi network.

To enable your SSID broadcast, follow the instructions below. Different computers may have different interfaces.

  • Check your wifi router’s IP address, username, and password.
  • Open a browser on the computer or mobile phone.
  • Use an Ethernet cable to connect to the Internet on your PC or a mobile phone with an internet connection.
  • In your browser, type the IP address and hit Enter.
  • Select Login after entering your User name and Password.
  • Select Wireless > Wireless Settings from the drop-down menu. 
wireless option
  • Select Save after checking the box next to Enable SSID broadcast.
Enable SSID broadcast.

8. Check The Device Interference

Wifi use the same 2.4 GHz or 5 GHz frequencies, and numerous household gadgets, such as your cordless phone, microwaves, Bluetooth speaker, and so on, might interfere with WiFi signals. You can inspect these devices to see if they are the source of the problem.

  • Unplug the power supply and switch off all the devices.
  • Reconnect your WiFi on your computer and see if it appears.
  • If the issue is resolved, it appears to be due to device interference.
  • Move your modem and wireless router to a different location where they will not be exposed to the same light as your other household gadgets.
See also  14 Fixes: Hl2.Exe Has Stopped Working Error

9. Temporarily Log Out Of Windows

Simply log out of Windows and pick your Wi-Fi network to resolve the issue. You should be able to join your Wi-Fi network at this point.

Remember that this is merely a workaround, and if it works for you, you’ll have to do it again the next time you run across this problem.

  • You can log out of Windows by pressing the Windows Key + L combination.
  • Choose your Wi-Fi network by selecting the Wi-Fi symbol in the bottom right corner.
  • Return to Windows now.
  • This is merely a workaround, but it might come in handy if you have issues with your Windows home network.

10. Use The Network Troubleshooter

The Windows 10 network troubleshooter must be able to fix any issues with your Wi-Fi network adapter that are simple to fix.

  • Select the Settings app from the Start menu by typing Settings in the search box.
  • Select Update & Security from the Settings window.
Update & Security
  • In the left navigation menu, choose Troubleshoot, then Additional Troubleshooters in the right pane.
  • Select Network Adapter from the list of troubleshooters at the bottom of the page. Choose the Run the troubleshooter option from the menu that displays.
run the troubleshooter
  • The troubleshooter wizard will guide you through steps while checking various adapter and system settings that are the most likely source of your network problems.
  • Restart your computer if the troubleshooter is successful.

11. Disable IPV6 Protocol

When attempting to connect to networks or the internet, having the IPv6 protocol enabled on your system can cause problems in some circumstances. Often, disabling this protocol solves problems like these.

  • Navigate to the Wi-Fi Properties window using the same process as before.
  • Find Internet Protocol Version 6 (TCP/IPv6) in the list of connection elements. Remove the checkmark from the checkbox to the left of this item.
Disable Ipv6 Protocol
  • Choose OK. Check if the Wi-Fi network is again displayed in the list of networks after restarting your computer.

12. Reset TCP/IP

Manually reset all TCP/IP connections if possible. This can help you resolve any network connection issues preventing your network card from seeing available networks.

  • As an administrator, open the command prompt. Choose Command from the Start menu, type command into the search box, then right-click the app.
  • Type the following command lines in the command prompt window, and press Enter after each.
netsh int ip reset

(Enter)

netsh int tcp set heuristics disabled

(Enter)

netsh int tcp set global autotuninglevel=disabled

(Enter)

netsh int tcp set global rss=enabled

(Enter)

13. Obtain New IP Settings

It’s possible that the issue with your Windows 10 PC not being able to find your Wi-Fi network has nothing to do with locating the network and everything to do with making the connection. This can happen if your computer’s IP address conflicts with another device on the network.

  • Select the Command Prompt app from the Start menu after typing the command.
  • Write “ipconfig /release” at the command prompt window and enter.
  • The IPv4 IP address will be blank in the text following this command.
  • Next, run ”ipconfig /renew” into the command prompt and hit Enter.
  • A new IP address will appear in the IPv4 Address field when running this command.
See also  How To Increase VRAM: 5 Easy Methods

14. Change the WiFi Channel on the Router

  • Open a web browser and write the router’s IP address into the address bar.
  • At this time, your browser may display a warning screen. To proceed, go to Advanced > Proceed.
  • Enter your e-mail address and password. Check the back of the router for your login credentials if you don’t remember them.
  • After that, go to Wireless Settings. This option’s name and location will vary depending on your router. You’ll have to go to Advanced Settings most of the time first.
  • Make sure you select the frequency band you wish to alter the channel (2.4 GHz or 5 GHz). There may also be an auto-connect feature that has to be disabled.
2.4 GHz or 5 GHz).
  • Change your WiFi channel using the Channels drop-down option.
Change your WiFi channel

15. Temporarily Disable Windows Firewall

If it doesn’t work, look at the Windows Firewall as a possible source of the problem. To test this, temporarily disable the Windows Firewall.

  • Select Windows Defender Firewall from the Start menu after typing Firewall in the search box.
  • Select the option “Turn Windows Defender Firewall on or off” in the left menu of the Windows Defender Firewall software.
  • It will show up a window where you can adjust the level of protection. Under both areas, select the radio box to Turn off Windows Defender Firewall.
  • After selecting OK, restart your computer. Check that Windows 10 can now find the Wi-Fi network after it restarts.

Conclusion

It might be frustrating when you want to connect your computer to the Internet, but the WiFi network does not appear.

This “wifi network not showing up” issue could be caused by a WiFi problem, a connection problem, an incorrect WiFi router, PC configuration, or a WiFi network driver issue. To resolve this problem, follow all of the steps outlined in this guide.

FAQs

Why Is My Wi-Fi Network Not Showing Up?

Check that your computer/device is still within the router/range. Modem’s If it’s currently too far away, bring it closer. Check the wireless settings by going to Advanced > Wireless > Wireless Settings. Check to make sure your Wireless Network Name and SSID aren’t hidden.

Why Is Wifi Network Not Showing Up On Laptop?

Open the Settings menu. Choose Wi-Fi. At the top, make sure Wi-Fi is turned on. If you don’t have security turned on or have already joined the network, your Android smartphone will connect to it automatically.

Why Can’t I Find My Wi-Fi Network On My Phone?

Go to the Settings > Wireless & Networks > Wi-Fi panel on your Android device and select Wi-Fi Settings. Look for your network’s name (SSID) on the list of nearby Wi-Fi networks. If your network’s name isn’t listed, the AP or router may be concealing its SSID. To manually configure your network name, select Add Network.