Verizon All Circuits Are Busy: 9 Fixes

verizon all circuits are busy

One of the numerous benefits of telecom services is making uninterrupted calls. But seeing error warnings each time you try to make a call, particularly a long-distance call, may be quite annoying. Consequently, Verizon customers receive the warning, ‘All Circuits Are Busy’ which can be a real pain in the tummy.

Other phone service providers, like AT&T, also have the same issue, so Verizon isn’t alone with heavy traffic.

Today, we go through some likely reasons why Verizon all circuits are busy and overloaded, as well as some potential solutions. Onwards we go.

The Dreaded ‘All Circuits Are Busy’ 

The “All circuits are busy” notice has been there since telephone communication was founded. A different nice woman may have spoken the phrase over time, but the meaning is still the same. 

When a customer attempts to make a call, most telecom operators, including Verizon, employ the notice anytime a connection issue arises.

The most apparent explanation is that you are either not receiving a signal or the individual you are attempting to reach is outside your phone’s coverage range.

Depending on the available signal strength, your phone will determine the closest phone towers to connect when you contact someone. Your phone will send a message of origination to your network operator, Verizon, as soon as it establishes a secure connection. 

Your Electronic Serial Number (ESN) and Mobile Identification Number (MIN) are included in the message for authentication.

Verizon sends a channel assignment message back to your smartphone when the verification procedure is through, and your device will connect to the designated channel to conduct the call. 

You will, however, receive the “All circuits are busy” notice while placing a call if your device cannot connect to the designated channel or if there are no open channels to connect to.

Reasons for Verizon’s All Circuits Are Busy Issue

You will not always hear the same message when you call for several reasons. The following are typical causes of all circuit’s busy notifications while placing a call.

Dialing an Unreachable Number

You can get an all-circuits busy telecaller warning if you dial a wrong or partial number from your smartphone. To prevent the problem, double-check the number after calling. You can experience that if you dial a number from a different network. If this occurs, it is the fault of the other party.

Congested Network Traffic

When several users access the network at once, the system network becomes overloaded, and calls cannot be placed. Even basic text messages cannot be sent due to network congestion.

Therefore, it is better to either put off calls during busy times or wait for a little before trying again. Verizon hardly ever has network traffic problems, but it is a possibility.

There Are No Outbound Connections Available

It is among the most typical excuses for why you can not make a call. No free connections are accessible right now because there are not many towers in the neighborhood. Small towns and rural areas with limited channels frequently seem to have the problem.

Service Outages

Verizon has comprehensive network coverage. However, you could experience a service outage if any maintenance work is done. A network outage might also be brought on by severe weather and natural calamities. You can try calling Verizon or customer service to rectify any problems with the infrastructure or cables.

The Issue May Be With Your Phone

If your device is broken, it could be difficult for you to connect to the network to make a call. Your mobile phone’s internal antenna is what establishes connections and places calls.

Your device will not be able to send or receive signals to place a call if the antenna is damaged. The best action for the problem is to get your equipment examined or replaced.

Blocked Calls

You can get a message saying that all circuits are busy if the person you contact has banned your number. Apps that block caller ID stop calls from getting through by preventing them from connecting to the signal.

When an attempt is made to call a blocked number, the applications will quickly signal busy. Try phoning the individual from a different number or contacting them directly.

Fix: How to Get Rid of Verizon Busy Circuits

Verizon

The Verizon network is wireless. Therefore, it may not be easy to understand how circuit switching impacts callers to the point where calls are dropped.

After dialing multiple other numbers, if the problem persists, it is a Verizon network issue. By attempting the 9 solutions listed below, you can endeavor to resolve the problem.

  1. Hang up and make another call
  2. Restart your phone
  3. Verify if there is a service outage
  4. Check the signal reception on your network
  5. Turn on or off airplane mode.
  6. Make a call outside business hours.
  7. Inform the Number’s Owner of the Issue
  8. Change Your Sim Card
  9. Receive technical support from Verizon

1. Hang Up And Make Another Call

Hanging up and waiting for at least 5 to 10 minutes before contacting the number you were attempting to reach should be your initial course of action.

Also, you should wait till a few more outbound connections are available as a lack of them causes the error message.

2. Restart Your Phone

Any network-related issues are instantly resolved, and you may connect to the signal by restarting your device. It will restore all the signals and make the necessary adjustments to enable a quicker and more dependable internet connection. When your mobile doesn’t let you make calls, this becomes one of the most practical solutions.

3. Verify If There is A Service Outage

An interruption in service may occasionally be the root of all your problems. In most cases, Verizon may be performing maintenance on the part of its equipment.

If there is a service interruption, you can sign in to My Verizon, and a notification will appear at the top of the page. For additional information regarding outages, you might also write “Service outage” into the chat window.

4. Check The Signal Reception On Your Network

Check The Signal

You could occasionally experience issues with network coverage if you are in a terrible location. The phone can assume that connections are busy if it tries to connect to the cell tower or the intended receiver but is unsuccessful due to a poor signal.

Checking the signal bars, often shown at the top of the phone screen, is the simplest way to determine if you are getting excellent network coverage.

Additionally, go to a higher elevation where the reception is greater and less interference from obstructions is present.

If you reside in an apartment building or a basement with several walls, consider evacuating and re-attempting to make your call.

5. Turn On Or Off Airplane Mode

Turn On Or Off Airplane Mode

When a connection is having trouble, the flight mode setting is useful. You might have improved your phone’s connection and obtained a better signal by turning it on and off.

All wireless transmissions are halted when your phone is in airplane mode; when you switch it off, new transmissions start.

Your smartphone would reestablish a better connection if the issue were a straightforward malfunction resulting in poor connectivity.

Android users can turn on airplane mode by:

  1. Tap the Settings app to access Settings.
  2. Access Networks and Wireless, or Network and Internet as certain phones may refer to it
  3. To enable the options, find Airplane Mode and hit the slider.
  4. Wait 30 seconds before deactivating once more.

This is how iPhone users may turn on airplane mode:

  1. Click Settings.
  2. Touch the slider next to Airplane Mode after that. When it becomes green, the setting has been implemented.
  3. Before dragging the slider to disable the option, give it at least thirty seconds.
  4. The setting is active when an aircraft symbol appears where the signal bars should be at the top of the screen on Android and iPhone.

6. Make A Call Outside Business Hours

The busiest times for Verizon mobile network are as follows; On weeknights, these hours are often from 7 to 11 p.m. On weekends, this may vary. It cannot be very pleasant to try to call during busy times.

There will undoubtedly be some connectivity issues because so many people use Verizon services on the road.

To avoid connection problems resulting in the warning “All circuits are busy,” you might wait until the connection is under less strain or call before the peak hours.

7. Inform The Number’s Owner Of The Issue

Inform the owner of the number if the connection problem only happens with that one. Because the issue is with their service provider and not yours, you might utilize alternative texting platforms like WhatsApp or Messenger.

To determine whether the issue impacts all of your outgoing calls or calls to one number, it is crucial to contact other numbers as soon as the connection trouble continues.

If you see a warning that says, “Your call cannot be completed as dialed,” the issue lies with you, and you should double-check that you entered the right number. 

Consider providing the area code plus the number you are trying to contact because, in most cases, your phone system will not recognize the number sequence.

Additionally, if you called the number with the area code first and got an error message, try contacting the number without the code this time.

8. Change Your Sim Card

Change Your Sim Card

Sometimes your sim cards might be problematic and prevent you from receiving the signal when you want to make a call. 

If the problem was with the sim card, try removing it from the slot and reinstalling it after a few minutes. Your phone number will be re-registered with Verizon, resolving the issue.

9. Receive Technical Support From Verizon

Receive Technical Support From Verizon

Contacting customer support can assist when you can not make a call and have the same difficulty repeatedly. The representative will walk you through potential ways to change the circumstance. 

  • By dialing *611, you may reach Verizon technical support and receive the assistance you require.

Conclusion

The most frequent causes of the Verizon Circuits-Busy message are a network outage, incorrect network settings, device and SIM card difficulties, and call blocking. You can choose the best way to address the problem using the ones covered in this article.

The best course of action is to get in touch with Verizon customer service and request an urgent resolution to the issue. If Verizon is at fault, getting in touch with them could also earn you extra benefits like a reduction in your subsequent payment or a credit balance.

FAQs

What Does It Mean When Verizon Says All Circuits Are Busy?

When Verizon displays the notification “All Circuits Are Busy,” it signifies that connecting to a non-Verizon customer is having connection problems. Restart your phone to address this and make sure the problem is not on your end by dialing different numbers.

Do All Circuits Are Busy Mean You’ve Been Blocked?

If the recipient has purposely banned your number, you can get an “all circuits are busy” error message. Now that call blocking applications are available, preventing spammers and anonymous callers from phoning is feasible.

How Do You Get Through When All Circuits Are Busy?

Try making your call again later, please. The notification “all circuits busy” indicates no open outgoing lines. Sometimes, more callers are attempting to use the phone lines that are accessible. Disconnect and call again.

How Do I Fix All Busy Circuits?

After dialing multiple other numbers, if the problem persists, it is a Verizon network issue. By attempting the 9 solutions listed below, you can endeavor to resolve the problem.
– Hang up and make another call
– Restart your phone
– Verify if there is a service outage
– Check the signal reception on your network
– Turn on or off airplane mode.
– Make a call outside business hours
– Inform the Number’s Owner of the Issue
– Change Your Sim Card
– Receive technical support from Verizon