6 Fixes For Tablet Driver Not Found Error

This blog describes a common issue, an error claiming that the tablet driver could not be identified on windows. In this example, we’ll look at Wacom tablets, but if you get a similar issue when using a tablet from another brand, employing the same approaches found below may help.

Identifying sources of “tablet driver not found” error

1. Discoverability of devices

As usual, the first concern is ensuring that the tablet is correctly connected to the port. While this may appear to be a basic and self-explanatory issue, many individuals overlook it. Just before you do anything further, do the following:

• Connect the cable to the port correctly.
• If the first port does not work, try another.
• Check to check whether it works by connecting it into another computer.
• Attempt a different USB cord.
• If none of these work, the problem is almost certainly a software issue. That being stated, we can begin work on the next few software patches.

2. Altered the Power Settings

The Windows operating system allows users to arrange it in such a manner that you may permit your PC to discontinue the Wacom driver and operations if there is a power outage.

If you’ve already adjusted the Power Management option, it might be a possible cause of the Wacom driver problem, reversing them usually solves the problem perfectly.

3. Corrupted Files

Certain crucial files in the Windows folder might become corrupted at times. Because when you install a driver, the configuration data is saved in the System32 folder.

This data can get damaged at any time, resulting in the ‘Wacom driver not responding’ error. However, removing a few items from the Windows directory will assist you in resolving the issue. Here are the actions to take:

• Go to your Windows/System32 folder.
• In the search bar, type “Wacom tablet.dat.”
• Now, click on this file and simultaneously hit Shift + Delete to delete all traces of it from your computer.

4. Installation blunder due to Image path

You may be aware that your registry’s Image Path entry is set to run the Wacom drivers first from the System32 location. However, if you placed their driver in a different custom path, you must instruct the service to load drivers from their predetermined custom path rather than the default one. If this is really the case, doing so will undoubtedly correct the problem or follow the next solutions.

Possible solutions

1. How to revoke Wacom Tablet Drivers

• Navigate to the Control Panel and choose Device Manager.
• In the Device Manager, look for Wacom.
• Search for Human Interface Devices and then right-click on Wacom Tablet.
• Select Properties.
• Navigate to the Driver tab and choose Roll Back Driver.
• Check to see if the gadget is operational.

2. How to Install and Update Wacom Tablet Drivers

• To launch the Device Manager, use the Windows logo key + R to open Run and type “devmgmt.msc.”
• Locate Wacom Tablet in the list of devices, right-click it, and select “Update driver.”
• If you get the “Location Not Found” error at this point, navigate to Program Files and then to the Tablet Plugins folder.
• You’ll see the option “fvWTPInstall x86” here; double-click it and then follow the onscreen directions.
• Finally, on the following screen, select “Search automatically for updated driver software.”
• After that, reboot your Wacom tablet and connect it back in.

3. Reinstalling Wacom Tablet Drivers

Uninstall any current Wacom programs and then reinstall them. Though it will delete any customizations and detect your Wacom tablet just as it did the first time you plugged it in, Use this method following the steps below:

• Navigate to the Wacom website or tablet brand site and search for the driver that is supported with your device and PC.
• To launch the Device Manager, use the Windows logo key + R to open Run and type “devmgmt.msc.”
• In this window, expand the “Human Interface Devices” area.
• Now that you see the Wacom Tablet listed in this area, right-click on it.
• From the pop-up menu, select Uninstall device.
• After that, unplug your Wacom tablet and connect it back in.
• Finally, in the following box, select “Browse my computer for driver software.”
• Now proceed to the area where you previously obtained the drivers and manually install them.

4. Restarting the Wacom Tablet Service

You will be restarting the software and reloading all of its data by doing so. This frequently solves the most basic driver issues. Take the following steps:

• To launch the Run window, press the Windows key and R at the same time.
• Enter services.msc into the search box.
• Scroll down the list of services until you find TabletServiceWacom.
• Right-click it and select Restart.
• Close the Services window and double-check that everything is working properly.

Useful Recommendations

Creating batch file

When your Wacom tablet is working properly, you should generate a batch document on your Windows. This eliminates the need to restart Wacom services manually every time you insert it into your computer. As a result, consider this procedure to be an expansion of the preceding one. Now, follow the instructions outlined below.

• First, right-click on an empty spot on your desktop.
• Next, select New > Text Document.
• Enter the following commands –

@echo off
NET STOP WTabletServicePro
timeout /t 5 / nobreak > NUL
NET START WTabletServicePro
timeout /t 2 / nobreak > NUL

• Save it to your desktop and convert the extension from “.txt” to “.bat”
• When you open this file, the Wacom tab will be restarted immediately. If you receive a UAC error while opening this, right-click the file and select “Run as administrator.”

Turn off Integrity Check.

Numerous Wacom tablet users have reported that they were able to resolve the Wacom driver not working issue by executing a few commands to make modifications to Windows’ setup.

However, if these procedures are not followed correctly, your system may suffer. So carefully and follow the instructions outlined below.

• To begin, use the Windows key + R to launch the Run window.
• Next, type “cmd” and press Shift + Ctrl + Enter to launch the command prompt.

• Now, input the commands listed below, pressing the enter key after each one.

bcdedit.exe /set nointegritychecks on
bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON

• After executing the commands, check to see if the Wacom Tablet is operating properly.

Conclusion

Essentially, that’s all the list of solutions that will be capable of handling the issue. We recommend that you attempt these solutions in the order listed. If nothing works, there’s almost likely an issue in your device that cannot be resolved in traditional ways. In such a circumstance, you may really just need to return your gadget to the shop where you purchased it or have them inspect it.

Frequently Asked Questions