You may have encountered the error or a glitch on your browser that says, “The remote device or resource won’t accept the connection’. This error usually happens when you have the wrong configuration on your network settings. There are chances that you may have enabled the proxy gate, or you might have incorrectly configured the IE settings.
The remote device or resource won’t accept the connection error is pretty common when trying to access your browser. Therefore, to help you fix the remote device or resource that won’t accept the connection error on your browser, we are here with some solutions that you could try for fixing this error message.
What are the causes of the remote device or resource not accepting the connections?
The reason the remote device or resource won’t accept the connection error usually depends on the Internet traffic, which is routed when you use your browser. When you configure the PC to use a proxy server, then all the internet requests are routed to your proxy server, and your proxy server takes care of all the internet traffic.
Moreover, the remote device or resource won’t accept the connection error also occurs when you have wrongly set the LAN settings. However, the main reason behind this error message is because of the corporate networks and the IT department. The IT department changes the LAN settings for using their Proxy server to access the internet connection.
Therefore, when you try to connect to your internet, and the internet settings remain the same, you might encounter the remote device or resource won’t accept the connection error on your google chrome browser or other browsers.
Ways to fix the remote device or resource not accepting the connections error
To fix the remote device or resource that won’t accept the connection error, You can try out each solution one by one and check if the problem is resolved or not.
Try to disable the proxy settings
Your proxy settings could be a reason for the remote device or resource won’t accept the connection error on your browser. Therefore, to fix remote device not accepting the connections error, you can try to disable the proxy settings on your computer and check if this solution 1 on our list was able to fix the problem.
Step1- The first step is to open proxy settings. For this, you can use the shortcut by pressing the windows key+ S key together and typing ‘internet options’ in the dialogue box and pressing enter.
Step2- After you get a window pop-up for Internet options, you have to go to the Connections tab and click the LAN settings button at the bottom of the window.
Step3-In the LAN settings, you have to untick the option of ‘Use a proxy server for your LAN.’
Step4- Now, you could click on OK to apply changes.
Step5- Finally, you can check if this solution was able to fix the remote device or resource won’t accept the connection error on your system.
Reset the IE (Internet Explorer) settings
Solution 2 on our list is resetting the internet explorer settings to default. This method has worked for many windows 10 users. However, make sure you are creating a backup for all your bookmarks and settings, as they may get lost in this method. Now, you may follow these steps to fix the network issue on your system.
Step1- The first step is to open internet properties. For this, you can open the Run dialog box by pressing the Windows key and R key together, and when the Run dialog box pops up, type ‘inetcpl. cpl’ and press enter.
Step2- Now, when the internet options or properties window pops up, go to the Advanced tab in the top-right corner.
Step3- In the advanced tab, you have to select the reset option at the bottom of the window.
Step4- Once you click on reset, a new window will pop up, where you have to select the option of ‘Delete personal settings’ and again click on reset. Once you click on reset, this will reset your Internet Explorer settings, where all your bookmarks or add-ons will be lost. Therefore, it is important that you make a backup beforehand.
Step5- Finally, you can restart your computer and check if this solution was able to solve the connection issue. However, if this solution could not fix the problem, you can try out the next one.
Try to temporarily disable the antivirus software, firewall, and content blockers
You can try to temporarily disable your antivirus software, firewall, and content blockers as they may be causing an obstruction for the remote device or resource to accept the connection. The windows firewall on your system is responsible for the incoming and outgoing internet data and packets, which may cause the connection issue. Moreover, your antivirus software and the content blockers on your system may also be the reason for this issue. Therefore, you can follow these steps for implementing this solution.
Step1- The first step is to open the control panel. For this, you can press the Windows key + R key to open the Run dialog box and type ‘Control panel.’ Press enter to open the control panel.
Step2- Now, in the control panel, locate the search box in the top right corner and type Windows firewall. Select the option of Windows firewall from the search results.
Step3- In the windows firewall window, you have to click on ‘Turn windows firewall on or off.’ You can find this option in the menu on the left panel.
Step4- Finally, you can turn off your windows firewall for both the private network settings and public network settings.
Restart your computer and check if this solution was able to fix the remote device or resource won’t accept the connection error on your browser.
Try using the command prompt
Sometimes, you can encounter the problem of the remote device or resource not accepting the connections when the remote device or resource fails to target the address in a specific domain. Therefore, to solve this issue, we can try using the command prompt. Follow these steps for executing this method.
Step1- The first step is to open the command prompt. For this, you can press the Windows key + S key to open the search box.
Step2- Type ‘command prompt’ in the search box and right-click on the application from the menu to select ‘Run as administrator.’
Step3- Once you select the command prompt to run as administrator, you have to type GPUPDATE/FORCE command.
Step4- Finally, restart your system and check if this solution was able to fix the issue.
Run a malware scan
Another reason for the remote device or resource not accepting the connections on your browser is because of some malware infection on your system. Malware infection or unwanted software can cause this error. Moreover, it is challenging to find malware infections or the latest viruses on your system using the windows defender firewall. Therefore, you can try running a malware scan on your computer.
Some of the best software for scanning malware on your system are Hitman pro, Avast security, Malwarebytes, and Norton. You can get any of these software applications and run a malware scan on your system. If you find any malware on your system, then you can delete it and check if removing the malware was able to solve the problem.
Try to reset your gateway IP address
Your gateway IP address could be a reason for the remote device or resource not accepting the connections on your browser. The gateway IP address is responsible for sending traffic from your local networks to other networks. So, if there is an issue with your gateway IP address, then it may cause a network issue.
Therefore, to help you fix the remote device or resource not accepting the connection error on your system, you can reset the gateway IP address. However, it may be difficult to reset this address without proper technical knowledge. But, here are the steps that you can follow for implementing this solution.
Step1- The first step is to reset your proxy settings. For this, you do not need to open proxy settings on your computer. Instead, you have to open the command prompt.
Step2- Search ‘Command prompt’ in the search bar of your windows 10, and select the option of ‘ run as administrator.
Step3- In the command prompt application, you have to type ipconfig/release and press enter.
Step4- Once the ipconfig/release command is completed, you have to type a new command, ie, ipconfig/renew.
Step5- After the ipconfig/renew command is completed, you can close the application.
Step6- Finally, you can open an internet browser to check if this solution was able to fix the problem on your system.
Conclusion
So, these were some ways that you can try to fix the error on your browser. We hope the above guide was helpful.
