6 Fixes For PS4 Controller Won’t Connect

The DualShock 4 is one of the most popular controllers, and it can be configured both with and without wires. There could be several reasons why your PS4 is not getting connected. If ps4 controller won’t connect to the console, it could be due to battery issues, firmware issues and other connectivity interference. 

ps4 controller won't connect

Even though the general controller settings, you can try resetting it and connecting it again. Here are some of the ways that you can fix when ps4 controller won’t connect, however, before we move on to the solutions, we will be exploring some of the causes of this issue. 

Why PS4 Controller won’t Connect

One of the most common causes of the PS4 controller not getting connected is sync issues. At times the controller disconnects on its own or connects to a different device or console. During other times, a firmware issue might also be one of the main reasons for the controller disconnecting. 

You can try and check the battery or the USB cables as well. Damaged USB ports or cables can be one of the reasons why the PS4 controller is not connecting or disconnecting most of the time. 

If you are using Bluetooth to connect the controller, there might be an interference in the signal as well leading to an issue of connecting the same with the system. The interference of wireless connectivity might block your controller from being connected to the PC. 

How To Fix PS4 Controller That Won’t Connect

Since there are several causes for PS4 not connecting, you can check a few of these solutions to fix the issue. 

  1. Reset the PS4 Controller
  2. Connect the Controller via USB
  3. Restart your PS4 Console
  4. Check the Battery
  5. Bluetooth Interference
  6. Update Controller Drivers on Windows
See also  Difference Between PS4 And PS5 (An Honest Comparison)

1. Reset the PS4 Controller

If you are not able to connect your PS4 controller, you can reset it and try fixing this issue. This is one of the most simple and easy ways to try connecting the controller. 

You can follow these steps if you want to reset the PS4 controller. 

  • Switch off your PS4. 
  • Get a small paper clip that is not folded or something similar. 
  • Use that to push the small reset button on the controller. 
  • The reset button is next to the shoulder button L2. Hold the button for some time and release it. 
  • After that, connect it with the PS4 console and switch on your PS4. 

You can check whether you are able to connect with the system again. Most of the time, resetting the controller helps in connecting again.  

2. Connect the Controller via USB

If you are having trouble connecting your controller, especially through Bluetooth, then you can use a data cable. However, if you have already connected your controller with the help of the micro USB cable, you might want to change the same. 

If you are still not able to connect the controller, use a different USB cable or a micro USB connector. The micro USB connector is similar to the cable that is used by most Android smartphones. 

connect to the controller via usb

The more USB cables you have the better, as you can try out any of those. To check the compatibility of the cable, you will have to restart your console after connecting. If this does work out for you, the console will get automatically recognized and then your controller will also get connected. 

3. Restart Your PS4 Console 

Sometimes there might be issues with your controller and this might lead to corruption in your console as well. This corruption is what leads to a disconnection with the controller. You can restart your PS4 console by following these steps

  • Press and hold the power button of your PS4 console. You can also use a paperclip to hold the l2 button. 
  • You can release the button after you hear the second beep. 
  • You can then unplug the power cable. 
  • Plug it back after 2-3 minutes. 
  • After that, you can plug the controller back as well. 
  • Switch on the PS4 and check the controller. 
restart your ps4 console

After you restart your PS4 console, you can try connecting the controller. 

See also  New Steam Folder Must Be Writable Error: 12 Fixes

4. Check the Battery

If you are using a wireless PS4 controller and you are unable to connect it, you can try checking the battery of the same. Additionally, if your controller has a low battery, the controller might also disconnect time and again. 

Sometimes the controller light bar keeps flashing due to a bad battery so changing the same might be a common solution. 

You can follow these steps to check the battery and change it as well. 

  • Switch on the console after plugging the controller with the help of your USB cable. 
  • Hold the power button on your controller and check the Quick Menu. 
  • You will be able to see the battery icon on the left side of the Quick Menu. 

After you do this, you will also be able to see the battery life in the icon, on the left side. You can then try charging it at least for an hour. After you do this, try pressing the button in order to pair the controller, and then you can unplug the cable as well. 

You will have to keep in mind that, if you can’t charge your controller, you might either have to change the USB port or the cable itself. If that is not working for you either, try changing the battery, or charging port. 

You might also want to update the console or reset the controller if you are not able to check or charge the battery of your controller. 

5. Bluetooth Interference

If you are using your wireless controller and it keeps getting disconnected, there might be some sort of interference. Bluetooth devices usually should be closed so that there is no interference as such. 

If there are several connections, there might be more disturbances. You can try disconnecting other connections that you are currently not using. Additionally, you can stay as close as you can to the console so that there is lesser interference. 

Some other devices that result in signal interference and loss may be tablets, laptops, or other smartwatches. 

6. Update Controller Drivers on Windows

If you usually play on Windows, you can download or update the Controller driver through the Microsoft store. You will have to download the Microsoft.Net Framework and then install the DS4 Windows as well. 

update driver in windows
update driver in windows

As soon as you do this, the required updates for the controller drivers will also be installed. You can update it either automatically or manually. 

update driver in windows

Conclusion

PS4 controller might have issues with regard to its connectivity. There are several causes that result in PS4 not getting connected with the system. Sometimes there are firmware issues or even hardware problems. 

See also  6 Fixes: Diablo 3 Error 1016

You can try and check either the updates or the console itself. A majority of the time, restarting or re-connecting the controller will resolve the issue. However, if this does not work then you can try charging the battery or updating the driver as well. 

Frequently Asked Questions

Why Is My PS4 Controller Blinking But Not Working?

Your PS4 controller only blinking with blue light but not working might be because of low battery. You can also check the connectivity issues with regard to the same. Sometimes when there is a lot of interference, the pairing mode might not work either. So you can try resetting the controller or restarting it. 

Are Playstation Controllers Compatible With Other Devices?

Some of the other devices that are compatible with Playstation controllers are PlayStation Remote Play app, tvOS 13, macOS Catalina, iPadOS 13, iOS 13, and Android 10. 

Why Does My PS4 Controller Keep Blinking And Won’t Connect?

Some of the reasons why the PS4 controller keeps blinking could be because the battery is low.  A majority of the time, the only times your PS4 controller keeps blinking, is when you are not able to connect it to the console. 
You can either try resetting the controller or restarting. Another thing you could do is try charging the controller. 

How Do I Resync My PS4 Controller?

If you want to resync your PS4 controller, you can push the button in the controller for some time and then release it. You will also have to make sure that it is connected to the USB cable and your PS4 as well. 
After you do that, you will have to press and hold the center of the controller, which is the PlayStation button. This will enable the resyncing settings and the connection also gets restarted.