12 Best Fixes To No WiFi Networks Found

Are you struggling to connect to a WI-FI network? And receiving an error message that says No WIFI networks found? Or have previous WI-FI connections just terminated after Windows 10 revision? 

It is usually because of a faulty router or a problem with the WLAN network card driver. Like either the drivers are not cordial. Or they are corrupt. 

In this article, I will be assisting you with Fix No WI-FI Network Found On Windows error. And restoring the internet permit on your laptop or PC.

What is the No WIFI Networks Found Error?

No WI-FI Network is found Error occurs when your system is unable to detect any WI-FI network on the device to connect. 

Why does a No WI-FI Networks Found Error occur on Windows?

How to Fix No WI-FI Networks Found Error?

If this is the first time you have glanced at this dilemma, I advise starting with the WI-FI router and laptop itself. 

The first thing you can try to fix the issue WI-FI network not being found is by taking your laptop nearer to a Router. And with this, if the WI-FI gets triggered in your system. Great! You have fixed the issue.

If not. The fixes mentioned below will help you get rid of the No WI-FI Networks Found On Windows issue.

Before this, I would like to take a minute and give you a few quick fixes that might work for you and save you time from going through all the solutions:

  • Try switching your on and off WI-FI.
  • Try taking your device nearer to your router.
  • Make sure you have not set any connection limits.

If the above methods do not work. Probably, you are having some core issues that need to be fixed. Follow the below solutions to fix that.

12 Fixes to No WI-FI Networks Found On Windows:

  1. Run initial checkups
  2. Rollback your WI-FI adapter driver
  3. Update your WI-FI driver
  4. Reinstalling your WI-FI driver
  5. Disable the airplane mode
  6. Run the network adapter troubleshooter
  7. Disable your faulty VPN
  8. Run Internet Connections Troubleshooter
  9. Run a full virus scan on your computer
  10. Temporarily disable your Firewall
  11. Reset Network Adapter
  12. Contact Network Administrator

1. Run initial checkups

Before going for any big fixes, you can start doing the basic ones. 

As an initial step, you can try to connect any other device with your WI-FI network and see if the network is detectable to another device.

And if the network is detectable by another device. Then probably your laptop or PC is at fault for this. And not the WI-FI router. 

So, in that case, you can proceed with the fixes for the Windows that we have mentioned below. But if this is not the case. Then you might need to switch on/off your WI-FI router and try connecting again to the network. 

If this fixes the issue with the WI-FI network could not be found on Windows. Great! And if not, please move to the below methods.

2. Rollback your WI-FI adapter driver

If the trouble has started after a recent Windows Update. And if there were no issues before installing the new updates. Then probably, the newly installed updates have caused the error. 

In that case, you might need to roll back the driver back to an older version. To Rollback the WI-FI adapter driver on your device, follow the steps below:

  1. Open the Run utility on your windows.
  2. Now, type devmgmt.msc inside the input window and hit enter.
  3. Locate and expand the Network Adapters.
  4. Next, right-click on the WLAN card device and select Properties.
  5. Go to the Driver section and choose to Rollback the Driver option.

Now in the pop-up window. Select the reason why you want to roll back the driver. And follow the on-screen instructions to roll back the device driver.

It will take you back to the previous drivers that functioned fully. Now test it out. If this fixes the issue, No WI-FI networks found on Windows.

3. Update your WI-FI driver

If Rolling back to the previous drivers does not work for you. Try updating it to the updated driver. In most cases, the issue persists with outdated and incompatible device drivers that cause unnecessary problems. 

So, if you are still having issues with the WI-FI network connectivity. You can try updating the device drivers to the latest ones. And see if that works in your case. If you do not know how to update the device drivers on your device, follow the steps given below:

  1. Open the Run Utility. For this, you can use the Windows + R combination on your keyboard.
  2. Now, in the input window. Enter the devmgmt.msc for opening the Device Manager.
  3. Device Manager will display all installed device driver lists to you.
  4. Next, locate and expand the Network Adapter section. 
  5. Right-click your network adapter and select Update Driver from the context menu. 

Now, in the pop-up window. It will ask you to browse to the Updated Device Driver.

So, for that, you can select to search automatically for the device drivers and proceed with the on-screen instructions on the screen for updating the device driver to the latest one.

Note: If you cannot see any WI-FI network there. It is perhaps that you have no device drivers installed on your device.

In that case, Visit your manufacturer’s website. And download the valid WI-FI Card Version and Install it. We have discussed this in the next fix for No WI-FI Networks Found on Windows.

4. Reinstalling the WI-FI driver

If you were still unable to fix this by updating to the latest device driver, then consider reinstallation of the device driver.

Reinstallation of the device driver will fix any invisible issues. If there are any that are keeping our device driver to perform correctly. 

For reinstalling your device driver, follow the instructions below:

Before reinstalling the device driver. First, uninstall the old device driver.

If your WI-Fi network driver is not compatible with the adapter. You have to get rid of it. And allow Windows 10 to automatically install the correct version for your computer. For this, follow the instructions below:

  1. Go to Device Manager and expand the Network Adapters menu.
  2. Right-click your WI-FI adapter and select Uninstall device.
  3. Click Uninstall to confirm.
  4. Open the Action menu and select Scan for hardware changes.
  5. Restart your computer.

Now your PC will automatically install the compatible version for your system.

But if it didn’t. You might need to do this manually.

Now, you can manually download the latest device driver.

  1. Go to your manufacturer’s website for the latest device driver.
  2. Now, download the latest device driver for your PC.

Once done. Complete the instructions for the new device driver Shut down your PC. And again, restart it to see if the issue is resolved.

5. Disable the Airplane Mode

If you are still unable to connect to the WI-FI, make sure you have the Airplane Mode on your device disabled. And if it is enabled by any chance. Then disable it in the following steps:

  1. Open Windows Settings.
  2. Now in the search box. Enter the Airplane Mode and hit enter.
  3. Make sure that the Airplane Mode is disabled.

Now recheck and see if the issue of No WI-FI networks found on Windows is resolved or not. Else move to the next solution.

6. Run the Network Adapter troubleshooter

Windows 10 comes with a built-in Network Adapter Troubleshooter that automatically recognizes and fixes dilemmas that might be stimulating the WI-FI connectivity issues.

To Run the Network Adapter Troubleshooter, follow the instructions mentioned below:

  1. Tap on the start menu on your Windows. And then on settings (The Gear Like Icon). 
  2. Now, Go to Network and Internet. And then, tap on Network troubleshooter.
  3. Choose your WI-FI adapter, and tap on Next.

It will start discovering troubles, examining driver errors, and all the other issues that might be causing the error and will fix all of them. 

Once the network diagnostics procedure completes. Restart your device and check if your PC can now discover and connect to WI-FI networks.

7. Disable your faulty VPN

When you install some third-party apps such as VMware or VirtualBox. It automatically installs a virtual network adapter on your system. And to fix this. You might need to remove or disable it to fix any network problem.

To disable a virtual network adapter, follow the below steps:

  1. Open the Control Panel.
  2. Go to the Network and Internet.
  3. Choose Network and Sharing.
  4. Now, Click Change adapter settings. And right-click the virtual network adapter.
  5. Select Disable from the context menu to disable the Virtual Adapter.

8. Run Internet Connections Troubleshooter

If nothing has helped you so far. Then running the Internet Connections Troubleshooter could help you in case. To run the Internet Troubleshooter, follow the steps below:

  1. Open Windows Settings.
  2. Now in the search box. Enter Network Troubleshooter and select Fix Network Problems from the options.
  3. Now Click Next. And select fix my internet connection.
  4. Follow the on-screen instructions and complete the troubleshooting process.

Troubleshooting the Internet Connection will fix any network errors. And will resume the network services for you. If still, you are having issues connecting to your WI-FI. Move to the next fix.

9. Run a full virus scan on your computer

Whenever a system gets an error or some part of the functions does not work correctly. And nothing helps you in fixing the issue.

Then you should consider running a full virus scan on your system for any possible threats that could be troubling you.

Some malware agents are sneaky enough to inject your machine with malicious code and disable Internet access. 

If you have a healthy Windows Defender setup. Then you do not have to be worried about such things. But if not. Then there is a pretty good chance of a malware attack. 

If you have got an antivirus. Then quickly run a full scan and remove any harmful applications or .exe files if found.

10. Temporarily disable your Firewall (Not a Good Option Though!)

If your Firewall has strict rules, it might not allow any Internet access to protect you from incoming attacks.

And it could be the reason why you cannot identify and connect to any WI-FI networks on your Windows 10 PC. 

Here is how you can temporarily deactivate it: 

  1. Open the Windows Settings.
  2. Next, search for Windows Firewall and open it.
  3. Click Turn Windows Defender Firewall on or off and Set Private network settings to Turn off Windows Defender Firewall.
  4. Now, do the same for Public Network Settings. 

If it works. It means that your Firewall is at fault. But you can fix it by restoring firewall settings to default: 

  1. Tap the Windows key and type Firewall.
  2. Now choose Firewall and Network from the menu. 
  3. Click Restore firewalls to default.
  4. Click Restore defaults to verify. 

If you have a third-party firewall on your Windows 10 PC, which overrides the Defender Firewall, revise the above steps accordingly. 

For instance, antivirus solutions can block Internet permits if they have a real-time protection engine with a built-in firewall set to a drastic hazard level.

11. Reset Network Adapter

If you are still having issues with the Network Adapter. Then you can try resetting the Network Adapter to fix it.

Many users reported that resetting the WI-FI network adapter helped them fix various WI-FI problems on their Windows. And could be helpful to you too. For resetting the Network Adapter, follow the below instructions.

  1. Use the Windows key + I combination to open the Windows Settings. 
  2. Now, Go to Network and Internet. And select the Status tab. 
  3. At the bottom, you will get the network reset link. 
  4. Click on the Reset now button.
  5. Proceed to verify the changes and complete the reset process.

It will restart your computer and refresh your network settings. Now try again to see if the No WI-FI networks found on Windows issue is resolved.

12. Contact the Network Administrator

If none of the above fixes helped you fix the issue. Then I highly recommend you. Contact the Network Administrator Support and convey your problem to them. If there are any additional errors with your system.

That is stopping you from connecting to the internet. Then possibly, they will help you out and fix that for you.

You can reach out to the support team by going to the official website of your manufacturer.


In this article, I have covered all the possible solutions to fix the WI-FI network not found. And I hope the fixes above helped you fix the error. You can try implementing the fixes again.

If you are still not able to resolve the error No WI-FI networks are found on Windows.

Meet the Author

Abdul Rahim has been working in Information Technology for over two decades. Learn how Abdul got his start as a Tech Blogger , and why he decided to start this Software blog. If you want to send Abdul a quick message, then visit his contact page here.