There may be times when you are unable to turn on your iPad. This might create a lot of confusion and frustration. Even though the iPad is considered one of Apple’s best products, users often face issues such as these. Even though there may be several reasons for this particular issue, there are some ways that you can resolve it as well.
A majority of the time, when there are firmware issues, your iPad won’t turn on. A simple factory reset or even resetting through DFU mode will help you resolve the issue.
Why your iPad won’t turn on?
There can be several reasons why your iPad does not turn on. A majority of the time, there are hardware issues that do not allow the device to be switched on. Apart from that, a dead battery or faulty USB cable and faulty lightning port could also be some of the reasons.
Screen and software damage can also lead to problems of your iPad not turning on. You can fix this issue in several ways. You can perform a hard reset on the iPad and charge the battery, and if none of these work, you can contact Apple Support.
How to fix your iPad not turning on
- Hard Reset your iPad
- Check the battery
- Check the USB and Lightning Port
- Factory Reset with iTunes
- DFU Restore your iPad
- Contact Apple Support
1. Hard Reset your iPad
A majority of the time, there are issues with the software, which leads to several glitches and bugs as well. Damage to the software of your iPad is one of the reasons why you are not able to turn it on.
To perform a hard reset, you will have to long-press both the Home and Power button until you see the Apple logo on the screen. If you do not have the Home button on your iPad, you can long-press the Power button and Minus Volume button until the Apple logo appears on the screen.
This step will automatically hard reset your iPad, and you will also have to keep in mind that the default factory settings will also be restored. This will automatically help you turn on your iPad and reset all the settings as well.
Additionally, restoring all the default settings might also help you fix certain glitches or bugs in the system. Hence, this method is regarded as one of the most helpful ones if your iPad is not getting turned on.
2. Check the Battery
Another reason you cannot turn on your iPad might be because of your dead battery. Even though this may seem like a very common issue, most people tend to overlook it, resulting in trying other methods to resolve the issue.
You can try taking your USB cable and plugging it in to charge your phone. You can leave it on charge for a few hours to fully charge the battery. Additionally, you have to make sure that the iPad is actually getting charged or not.
If this method is not working for you, you can try other methods which might be the root cause of the issue.
3. Check the USB and Lightning Port
If you have been trying to charge the iPad and it is somehow not getting charged, you might have to check the USB cable that you are using. Sometimes, your iPad might not get charged due to a faulty USB cable, resulting in a low battery.
If your USB cable is working perfectly fine, you might have to check your lightning port. A majority of the time, these hardware issues are not considered, so there is a high possibility that you refer to other methods to resolve the issue.
If your battery is dead, checking whether the USB cable and the lightning port are functioning properly is very integral. This is mainly because people tend to overlook this issue and focus on other possible causes.
4. Factory Reset with iTunes
Sometimes certain software updates might lead to glitches and bugs, resulting in your iPad not functioning properly or not turning on at all. Hence, performing a factory reset with the help of iTunes can resolve the issue.
Performing a factory reset will allow all the existing content and settings to be removed and restore the default settings. It will also help the system get refreshed, which will possibly help you turn on your iPad again without any difficulty.
In order to perform a factory reset with the help of iTunes, it is necessary for you to have iTunes stored either on your Windows PC or Macbook. You can follow these steps to perform a factory reset.
- With the help of the USB, connect your iPad with your PC or Macbook.
- After that, you will also have to power up your iPad.
- If your iPad has a home button, long-press the home and power buttons until the Apple logo appears on the screen.
- If you have the new version of the iPad without a home button, long-press the volume down button and the power button till you see the Apple logo on the screen.
- Launch iTunes on your computer after you perform this step.
- Go to the Sync option from the main page of iTunes.
- After you do this, you will have to enter the passcode, which will help you unlock the device.
- Click on the Restore iPad option, which will enable you to restore the most recent backup.
After you perform these steps, you will be able to restore the default settings. You can also update all the applications when you are connected to iTunes. This will help you resolve the glitches and bugs that might be there, which will lead to other issues.
A majority of the time, this method will help you resolve the issue of your iPad not being able to turn on. Additionally, performing a factory reset will also resolve several glitches and bugs you might face.
5. DFU Restore your iPad
This method is very similar to performing a hard reset. Moreover, the restoration is as in-depth as the hard reset. DFU means Device Firmware Update, and it is one of the troubleshooting methods to fix or adjust the firmware on your iPad.
With this method, which is, DFU takes around 30 minutes to restore the iPad. Initially, you will have to connect your iPad to your computer with the help of a USB cable. Long-press both the home button and power buttons.
It might roughly take around 8 seconds, and you can release only the power button. You will also have to keep in mind that nothing should appear on the screen. If the Apple logo appears on the screen, you have held the power button for too long.
While you are trying to restore your iPad through DFU, iTunes will automatically send an alert if your device is in recovery mode. In case you can see something on the screen of your iPad, you might have to try these steps again.
As soon as you do this, your device will be as good as new. Additionally, you will also have to keep in mind that your iPad may take a few days to be recalibrated. While the device is in the process of being recalibrated, make sure you fully charge it.
6. Contact Apple Support
If none of these methods works for you, the best and easiest solution would be to contact Apple Support. You can visit the nearest Apple Store, where they will be able to provide assistance and help you resolve this issue.
If you would want, you can also schedule an appointment before you go, so that it is easier for you to get the required technical assistance once you reach the store. This will immensely help you resolve both hardware as well as software issues that might have been causing it.
Sometimes you might have faced the problem of not being able to turn on your iPhone, iPad, or any other device for that matter. A majority of the time, this issue’s root cause is a dead battery or a faulty charger.
However, if your lightning cable and your iPad’s battery are completely fine, you might want to check other system issues or software glitches. Hence, resolving it might become slightly easier; you can perform a force restart or reset through dfu mode. These methods will help you resolve the issue most of the time. If none of these are working, the last resort would be to contact Apple Support.
Frequently Asked Questions
Why Won’t My IPad Turn On Even When Plugged In?
Your IPad Might Not Turn On Even When It Is Plugged In Because Of A Faulty Charger Or Even A Liquid Damage That Has Led To The Damage Of The Wall Outlet As Well. You, Will, Have To Fix The Internal Hardware If You Are Facing This Issue.
How Do I Force My IPad To Turn On?
You can force turn on your iPad by long-pressing the top button and the wake button until you see the Apple logo on the iPad’s screen. This is one of the easiest ways to force turn on your iPad or any other ios device.
However, there is a possibility of this method not working out for you, so you can download iTunes on your Mac and then plug the device into your system. After that, the entire ios system will get backed up, and the default settings will also get restored.
How Do You Fix An IPad That Won’t Turn On?
There Are Several Ways That You Can Fix An IPad That Won’t Turn On. You Can Perform A Hard Reset Or Restore The Default Settings Through The DFU Mode. Another Way Of Fixing It Is By Using iTunes, So That You Can Reset The Ios System And Also Update The Software And Other Applications, Which Will Fix Any Bug Or Glitches That Are Present In The System.