12 Fixes to ‘Getting Windows Ready’ Stuck in Windows

“Getting Windows Ready” with “Don’t Turn Off Your Computer” meaning ?”

getting windows ready don't turn off your computer

“Getting Windows ready, don’t turn off your PC” might become stuck on a Windows desktop or laptop. Nothing changes do not matter how long you wait. When you try to turn off, turn on, or reboot your computer, you get “Getting Windows ready stuck.” Allow yourself to be free of this vexing issue. We’ll show you how to quickly fix Windows 10, 8, or 7 that are stuck on the ‘Getting Windows ready’ screen.

How To Fix Getting Windows Ready Stuck

  1. Wait Patiently For 2-3 Hours
  2. Shutdown Your Computer Thoroughly
  3. Disable Automatic Updates
  4. Uninstall Recently Installed Update
  5. Run System File Checker
  6. Perform Startup Repair To Fix Boot Errors
  7. Perform System Restore Or System Image Recovery
  8. Clean Install Windows To Fix System Issues
  9. Reset your PC
  10. Delete Problematic Files
  11. Restore Windows Operating System (Without Previous Backup)
  12. Uninstall recently installed software

1. Wait Patiently For 2-3 Hours

Patience is a virtue, so try to wait it out. Microsoft’s support personnel genuinely recommend this. 

When your computer says “Getting Windows ready,” it’s possible that your system is downloading and installing files. Also, it may perform other operations in the background. It may take some time for your system to complete these tasks.

So, the first thing you may try if you want your computer to boot is typically to wait. Wait no more than 1-2 hours, and if the problem persists, try one of these additional solutions.

2. Shutdown Your Computer Thoroughly

To fix “Getting Windows ready, don’t power off your computer,” here is a working method that has helped many users.

Powering down your computer is recommended. It will clear all of the information in the computer memory without causing any data damage. Regardless, it can be used to get out of the Getting Windows Ready Stuck cycle.

To do so, follow these steps:

  • Even if you are stuck on getting windows ready, turn off your computer first.
  • Next, unplug all of your system’s peripheral devices (such as an external hard drive, headphones, USB flash drive).
  • Now hold and press the power button on your computer for 30 seconds.
  • Also, unplug your computer’s power cable. However, if you’re using a laptop with a replaceable battery, unplug it.
  • Replace the laptop battery and reconnect the power cable to the computer.
  • Finally, turn on your PC and laptop computers.
  • The “getting Windows ready stuck” issue should now be resolved or move on to the next solution.

3. Disable Automatic Updates

One of the possible causes of Windows ready being stuck in Windows 10/8/7 is automatic updates. You can turn off Automatic Updates in Windows to prevent the getting windows ready stuck problem from recurring.

  • To open the Run command, press Windows + R. Press Enter after typing services.msc.
services.msc
  • Double-click Windows Update in the Services list to open it.
Windows Update
  • Under the General tab, select Disabled as the Startup type, then click Apply and OK.
 select Disabled startup type
  • Restart the computer if necessary.
See also  What is BIOS and How to Update the BIOS on Your Dell System

4. Uninstall Recently Installed Update

Microsoft publishes several updates at random to improve the performance and security of Windows 10. However, an improper Windows update may cause Windows 10 to become stuck in an update loop.

You may receive the “Getting Windows ready, don’t turn off your computer” error after or during the update installation. You should uninstall it in safe mode.

Take the following steps:

  • Restart the computer or laptop while holding down the Shift key. 
  • Go to the Start Menu and select the Power button to access the Power options.
  • Now, while pressing down the shift key, click. In Advanced options, Windows will start automatically.
restart windows
  • To start the system in Safe Mode, go to Startup Settings and press the F4 key.
  • Now, in Safe Mode, open the Control Panel, and then Programs and Features.
uninstall a program
program and features
  • Then click View installed update in the left column.
view installed update
  • Select and uninstall each of the recently installed updates one by one.
uninstall update
  • Last but not least, reboot your Windows 10 machine.
  • Check to see if the getting Windows ready stuck issue has been resolved, or move on to the next solution.

5. Run System File Checker

Windows is taking too long to get ready for Windows 8/10, or if the following techniques fail to solve the problem. You can use the System File Checker program. Corrupted files on your computer might sometimes cause Windows to need to prepare for an update at every reboot.

Here’s how to repair corrupted system files:

  • Insert the installation disc or USB drive into your PC and boot it from it in the same way as before.
  • Go to Repair your computer, select Troubleshoot from the Choose an option screen.
  • On the Advanced options page, select Command Prompt.
  • In WinRE, select Command Prompt.
  • After the cmd window has been launched, type the command SFC /scannow and hit Enter.
    • command sfc /scannow
SFC /scannow
  • Wait till the verification procedure is completed 100 percent.
  • Restart the computer to determine if the Windows 10 getting ready to loop still occurs.
scan and correct faults

6. Perform Startup Repair To Fix Boot Errors

Performing a Windows startup repair may be able to help you fix your computer’s inability to get Windows ready after each reboot.

  • With the Windows installation CD, boot into the Windows Recovery Environment (WinRE).
  • Then go to WinRE’s Advanced options and choose Startup Repair: Fix any issues preventing Windows from loading.
  • Windows is being prepared. Do not shut down your PC.
  • Wait for the repair to end, then check to see whether the Windows 10 stuck on getting Windows ready has been resolved.
  • If you don’t, you can get the message “startup repair couldn’t repair your PC” or “automatic repair couldn’t repair your PC.”

In this instance, a system restore is the best option.

7. Perform System Restore Or System Image Recovery

You can restore the Windows 10 operating system to a previous state without getting stuck on Windows issues. You have enabled system protection to create the restore points or utilize Backup and Restore to build system image backup.

You must also enter the Windows Recovery Environment. As an example, consider System Restore.

  • Select System Restore from the Troubleshoot > Advanced options menu.
  • It takes some time to prepare for the restoration; after that, you’ll need to check in to your account.
  • To proceed, click Next in the System Restore dialogue, select the restore point, and then click Next.
  • To begin restoring, confirm the procedure and click Finish.
  • Check to see if the problem has been resolved by restarting your computer.
See also  7 Ways to Fix Discord JavaScript Error

8. Clean Install Windows To Fix System Issues

The remedies mentioned above are likely to work for you. If they do not, the only option left to solve the getting windows ready stuck error is to do a clean Windows installation.

It is suggested to back up any vital data from the system partition. Keep your license key handy before beginning the clean reinstallation steps.

To complete the Windows 10 clean installation, use the Media Creation Tool to build a Windows 10 installation media.

You’ll need to make an installation media on a different PC/laptop because you can’t access your system. After that, follow the instructions below:

  • Connect your system to the Windows 10 installation media and restart from there. 
  • You boot from the Windows 10 installation disc. Make sure to press the appropriate key or modify the boot priority in BIOS.
  • Select your favorite language and then click Next. On the following screen, click Install Now and follow the onscreen instructions. 

(Please keep in mind that a clean install will destroy all contents from the hard drive, so make a backup of all sensitive data first.)

  • Also, before running a clean install, make sure you select the correct drive. And, once the install is complete, the issue with Windows not starting is rectified.
  • For many people, though, completing a Windows 10 reset is also effective. And, unlike a clean install, resetting Windows 10 is a simple procedure.
  • To reset Windows 10, follow these steps:
    • Then select Repair your machine from the drop-down menu.
    • Select Troubleshoot > Reset this PC > Remove everything from the menu.
    • Then choose your Windows installation > Only the drive where Windows is installed > Just remove my files from the list.
    • Then, to begin the Windows 10 resetting installation, click the Reset button.

9. Reset your PC

If none of the other options work, restarting Windows is a more drastic procedure to fix the problem. For this, you’ll need to utilize your Windows installation DVD (or USB). 

For many people, though, completing a Windows 10 reset is also effective. And, unlike a clean install, resetting Windows 10 is a simple procedure.

Start the computer and select your language and other options in the Windows Setup window. “Next” should be chosen. 

  • To relaunch the Windows Automatic Repair tool, click “Repair your computer.” Select “Troubleshoot” from the Automatic Repair tool window.
  • Click “Reset this PC” in the troubleshoot advanced options.
  • Choose “Remove everything” from the drop-down menu.
  • Then choose “Just delete my files.”
  • When you click “Reset,” Windows 10 will begin to reset itself.

Although resetting your computer is a last resort. We hope that one of the methods listed above may assist you in resolving the issue of the “getting windows ready. don’t turn off your computer ” display.

10. Delete Problematic Files

When you restart your computer, the Windows Boot Options page will appear.

  • Choose “Troubleshoot > Advanced Options > Command Prompt” from the Windows Boot Options menu.
  • Type C: cd WindowsSystem32LogFilesSrt. SrtTrail.txt in the command prompt and hit Enter.
  • If you encounter something similar to this, click here: If the crucial file c:windowssystem32driversvsock.sys is corrupt.
  • Use the Command Prompt to navigate the stated directory and use the Del command to destroy the faulty file.
See also  14 Ways to Fix “Bad Pool Caller” Blue Screen Error in Windows

11. Restore Windows Operating System (Without Previous Backup)

This approach necessitates a program with the Universal Restore feature. It permits you to restore your system to a separate machine with different hardware. And AOMEI Backupper Professional is what you require.

AOMEI Backupper
  • Using AOMEI Backupper, create a bootable media.
  • Choose Create Bootable Media from the Tools menu. Then, to generate a bootable USB/CD/DVD, simply follow the wizard’s instructions.
  • On that PC, make a system image as well.
  • To back up system-related partitions, go to the Backup tab and hit System Backup (s). It will be chosen for you automatically, so all you have to do now is choose a destination (you can jump to the next part for detailed steps).
  • Because you’ll need it on another computer, you should back up Windows 10 to an external hard drive, NAS, network share, or another storage device.
  • To reinstall Windows on an unbootable computer, follow these steps:
    • Attach the device containing the system image. Then boot the defective computer into WinPE using the newly generated recovery drive.
    • To continue, go to the Restore tab and locate the Windows system image.
    • Remember to select Universal Restore from the Operation Summary screen.

12. Uninstall Recently Installed Software

You can get update issues if the software solutions aren’t compatible with the latest Windows 10 OS version.

So, prior to installing any program on your PC, be sure it’s compatible with your operating system.

  • In this scenario, switch off your computer, turn it back on. 
  • Delete any recently installed apps and programs using the power button. After that, reboot your computer and check for updates once more.

We hope that this information will assist you in upgrading to the most recent Windows edition. Also, unblocking the computer that is stuck on the Windows installation process.

Conclusion 

Hopefully, one of the options provided was successful in resolving the Getting Windows ready blocked issue. Make sure to follow the fixes appropriately offered. 

So that’s all for the Windows 10 stuck on “Getting Windows ready, don’t turn off your computer” issue. I did my best to collect a comprehensive list of all possible remedies for PC stuck on getting windows.

Frequently Asked Questions

How Long to Wait For Getting Windows Ready?

Waiting patiently for roughly 1-2 hours is usually suggested. If getting Windows ready is still stuck after a certain amount of time. Stop waiting and proceed to the troubleshooting procedures.

How Long Does It Take For Windows 10 Getting Ready?

The time it takes to download Windows 10 is determined by your internet speed and how you download it. Depending on internet speed, it could take anything from one to twenty hours. Depending on your device, the installation of Windows 10 can take anywhere from 15 minutes to three hours.

What do I do if my laptop is stuck on getting Windows Ready?

Disconnecting from the internet. Waiting a few hours or forcing a restart of your computer will usually get you through the stalled “Getting Windows ready” prompt. If it doesn’t work, spending the time to repair your Windows 10 installation should.

Why is getting windows ready stuck?

The “Getting Windows ready” blocked issue usually arises when an update fails for no apparent reason. However, in other cases, the problem becomes severe, with file corruption playing a significant role.