Water, Moisture, and technology don’t often get along, so seeing your expensive iPhone fall into the sink, bath, or any other body of water may be a heart-stopping experience. Present phones are far more durable than in the past, so all may not be lost. Get to know about how to Get Water Out Of iPhone speakers.
There are a few options for getting a splash of water out of the speaker. They all work in the same way. The water is forced out by a precise frequency sound broadcast through the speaker.
You can use a Siri Water Eject shortcut, a third-party app, or a website to eject the water from the speaker. I’ll describe the best ways to Get Water Out Of the iPhone Speaker in this article.
Check If iPhone Is Water Or Dust Resistant?
The Ingress Protection code, sometimes known as an IP rating, is used to rate the water resistance of phones. The IP rating of a device refers to its ability to withstand solid and liquid attacks. In case of water damage warranty may not be applicable.
- There are two digits in the IP rating. The first refers to dust resistance, whereas the second refers to liquid resistance, especially water resistance.
- If the iPhone has an IP68 rating, it can withstand solid objects and liquids.
- The IP68 grade is owned by the popular iPhone 13 and Samsung Galaxy S21 devices.
- While IP ratings show how water-resistant a phone is, swimming with phones will get you into danger.
- Oceans and pools contain salt, which can cause phone corrosion and compel you to replace it.
What Should You Do If Your iPhone Gets Wet?
- Get the iPhone out of the water as soon as possible.
- The iPhone should not be plugged in. Unplug it if it’s already connected in (very carefully).
- It should not be turned on. Short circuits may result as a result of this.
- Remove the damp iPhone from its case if it is in one. Take off the SIM card as well. Water may sit in these nooks and crannies for a long time.
- Wipe liquid off anything; you can use a soft towel or cloth.
- Clear the ports and sockets, turn the iPhone upside down and shake it.
- Turn off your iPhone.
What Happens If A Phone Falls In Water?
When a phone is submerged in water, liquid fills the port and speaker. Water will pour into the circuits of non-water-resistant devices, corroding the circuits, coils, and resistors if no action is done. It may also take time to break weak components on a water-damaged phone, so it may not take effect immediately.
Water-resistance protection is standard on all iPhone models. Under IEC standard 60529, the iPhone 7, mini, 8, iPhone SE, pro max, Xs Max, Plus, X, XR, and SE are IP67-rated for a maximum depth of one meter for up to 30 minutes.
The iPhone XS and newer models feature IP68 ratings, which allow them to be submerged for up to 30 minutes at a depth of two, four, or six meters, depending on the model.
Best Ways To Get Water Out Of iPhone Speakers
- Use Sonic App To Eject Water From iPhone Speaker
- Automatically Get Water Out of Your Speakers
- Use Water Eject Siri Shortcut To Get Water Out Of iPhone Speaker
1. Use Sonic App To Eject Water From iPhone Speaker
The Sonic app, which has a circled letter “V” after its name on the App Store, has been upgraded for iOS 14 and works wonderfully on iOS 15. It is compatible with any iPhone running iOS 13 or later and any iPad running iPad 13.
A few in-app purchases are available, but none are required for the app’s main functionality. You can pay to eliminate advertisements, change waveform patterns, and save frequently used frequencies. All of this isn’t required for water ejection.
Like some water expulsion apps, Sonic uses low-frequency tones to drive water out of speaker enclosures. Water Lock on the Apple Watch uses a “series of tones” to clear water from the device, but Apple does not specify in which low frequencies sound waves are used.
- After opening the Sonic app, tap the water drop icon in the center of the screen to clear water from your iPhone’s speakers.
- Sonic will immediately play a tone at the appropriate sound frequency, and you’ll need to turn up the volume on your iPhone to get enough vibrations to shake the water out.
- Place your iPhone with the speakers on an absorbent, lint-free, clean cloth to capture the droplets.
- Small water droplets should emerge from your speaker grilles, depending on how much water is there.
- Some may even emerge from the front speaker near the earpiece.
- Even if you can’t see the water drain, your iPhone should sound normal again in minutes.
- To silence the tone, tap the water drop icon one more.
- While the water drop icon plays the tone, the frequency displayed on the screen has no effect.
- Whether Sonic’s output is 440 Hz, 1080 Hz, or another frequency, tapping the water drop to play will produce the same sound on your iPhone.
- Check your cable to get water out of the iPhone speaker.
2. Automatically Get Water Out of Your Speakers
You may also clear water from your iPhone speakers using a different frequency. Adjust the frequency manually instead of using the water drop icon.
- To lower and increase the frequency, use the minus (–) and (+) marks or swipe down or up on the screen at a quicker rate.
- I’ve seen 165 Hz mentioned a lot on the internet, so somewhere between 150 and 200 Hz is a nice place to start.
- When ready, turn up the volume and press the “Play” button.
- Vibrating sound waves of pressure and displacement will shake the water when the frequency is set at the sweet spot.
- To catch the drops, use an absorbent lint-free towel, just like the water drop method.
- Check if your cable to get water out of iPhone speaker.
3. Use Water Eject Siri Shortcut To Get Water Out Of iPhone Speaker
Water Eject is a Siri Shortcut that you can use if you have Siri Shortcuts loaded on your iPhone. It functions in the same way that the Sonic app does. It emits a sound that instantly pushes the water out of the speaker grill.
- If you haven’t already, download the Shortcuts app from the App Store.
- Once the shortcut is installed, get the shortcut and tap the shortcut icon in the Shortcuts app to launch it.
- After that, go to My Shortcuts and tap it. Then, to execute the shortcut, press it.
- Begin the water ejection process by tapping the Start Water Ejection button. Make sure your iPhone’s volume is turned up.
- Check if your cable to get water out of iPhone speaker.
Although modern iPhones (iPhone 7 and later) are water-resistant to IP67 and IP68, accidents happen. Water can cause problems for a phone in more ways than you think.
Sometimes it is impossible to remove water from the inside of an iPhone. If that is the case, filling a bowl with silica packets and placing your iPhone speakers inside the bowl can help dry out a wet iPhone.