10 Fixes For “Kernel Data Inpage Error 0x0000007a” in Windows

What Does The Kernel Data Inpage Error Mean?

A corrupt or missing page of kernel data within a Windows page file causes the kernel data Inpage error, a Windows Blue Screen of Death (BSOD) error code. If your computer receives this type of stop code, it will begin gathering diagnostic data. Also, it restarts and displays the error message again if the main problem persists.

BSOD error codes appear when systems are unable to cope with crippling hardware or software difficulties. The operating system of your device will essentially force stop, displaying the error message.

The stop code 0x0000007a is frequently associated with the kernel data Inpage error.

The Cause Of Kernel Data Inpage Errors

A variety of issues can cause “kernel Data Inpage error.” It comprises gear that has failed or is old, as well as virus or malware infections. There are loose or broken cables and connections and incorrect BIOS settings, among other things.

Its error message may be accompanied by specific codes that can be linked to a particular problem of computer:

  • 0xC000009A: Lack of pool resources
  • 0xC0000185: Unseated or damaged cables
  • 0xC000009D: Loose cables or hard disk failure
  • 0xC000016A: Bad hard drive sectors
  • 0xC000009C: Bad hard drive sectors
  • 0x0000007A: File access error caused by a virus

Because of the severity of the kernel data Inpage fault, it can put your data and storage disc at risk far more than any other Blue Screen Of Death issue. Unfortunately, these errors are caused by problems that are not lost causes. Instead, they necessitate thorough troubleshooting and particular solutions for your gadget to resume typical performance.

When Does This Error Happen?

After rebooting a device from sleep mode, the majority of kernel data Inpage errors occur. The display of the error message indicates that your system cannot cope with the issue and will crash as a result. Kernel Data Inpage error isn’t to be taken lightly, especially as they can have a significant impact on your computer’s functionality.

Any BSOD problem has the potential to cause data loss. Any documents or files that were being used or updated at the time of the crash could be permanently lost or corrupted.

If your device displays this error message, you must troubleshoot and resolve any issues.


Make a backup of your data out of an abundance of caution. The kernel data Inpage error could be caused by various problems, some of which could end in losing all data on your hard drive.

Make copies of any important documents, images, or other things you can’t afford to lose, and put them on an SD card, USB drive, or cloud storage service.

Multiple Ways To Fix Kernel Data Inpage Error Windows 10/8/7

  1. Run Antivirus To Fix Kernel Data Inpage Error
  2. RAM Check with Memory Diagnostics Tool
  3. Fix 0x0000007a Kernel Data Inpage Error with System Log 
  4. Fix Kernel Data Inpage Error With Chkdsk
  5. Check Hardware Connections
  6. Update Device Drivers
  7. Uninstall Incompatible Software
  8. Run SFC and DISM scan
  9. Reboot Windows In Safe Mode
  10. Restore BIOS Settings to Default

1. Run Antivirus To Fix Kernel Data Inpage Error

File corruption and the Kernel Data Inpage error can also be caused by viruses or malware infection. You can use the Windows Defender tool. It’s a built-in antivirus program in Windows. It detects and removes any potential viruses or malware from your computer. 

windows security system scan

A deep virus scan can also be performed using a third-party antivirus application. Kernel Data Inpage Error in MS Windows 10/8/7 may be fixed with this.

Windows Defender application may do virus and malware scans. Third-party antivirus software can usually perform more thorough checks on your PC.

2. RAM Check with Memory Diagnostics Tool

If the Kernel Data Inpage Error happens frequently. If executing CHKDSK in Windows 10/8/7 does not solve the error. You should check your computer’s RAM.

  • Open the Windows Memory Diagnostics tool in Windows.
  • On the keyboard, press Windows + R. To run the Windows Memory Diagnostic program.
  • Type “mdsched.exe” in the Run and press Enter.
  • Then, using one of the two options, examine your computer for memory problems.
    • Check for problems right now (recommend), 
    • Check for faults the next time I turn on my PC.
Windows Memory Diagnostic
  • Your computer will restart once you select the first option. After that, Windowsdows Memory Diagnostic Tool will begin to discover memory problems.

If it finds no problems, you may rest assured that Your computer’s RAM does not cause kernel Data Inpage Error.

However, if it detects faults, it suggests your computer’s RAM is faulty. Therefore, a new RAM module is required.

3. Fix 0x0000007a Kernel Data Inpage Error with System Log 

You can also use the Windows Event Viewer program to determine which device, application, or event is causing the Kernel Data Inpage Error.

  • Launch the Windows Event Viewer application.
  • On your PC, go to Start and type Event or Event Viewer, then select Event Viewer.
Windows Event Viewer
  • Alternatively, open Run by pressing Windows + R on the keyboard.
  • Type “eventvwr” in the Run search box by 
  • In the Event Viewer, look at the System Log.
  • You can double-click the System after clicking Windows Log.
Windows Event Viewer
  • Then look through all of the system events to see if any error messages could be the Kernel Data Inpage Error source.

4. Fix Kernel Data Inpage Error With Chkdsk

The CHKDSK application in Windows can check the integrity of a file system and scan for and correct different file system issues. For example, a faulty sector or file system problem causes the 0x0000007a error. On Windows 10, you can use the CHKDSK command line to fix the Kernel Data Inpage Error. Check out the steps in detail below.

  • Open Command Prompt. Right-click on the Start Menu button (Admin).
open command prompt as an administrator
  • Type CHKDSK C: /f /r at the command (replace C with the operating system drive letter). 
  • If your computer needs to be restarted, type Y and click Enter.
Repair Hard Disk With CHKDSK
  • Allow the scan to complete, and if any issues are discovered, it will attempt to resolve them automatically.

When the procedure is complete, restart now and check if the error reappears.

Even after determining that your hard disc is in good working order, you may still encounter this error message.

5. Check Hardware Connections

Check and replace (if necessary) the IDE/SATA cables if you see a loose line or a hard disc issue code. Detaching, reattaching, or switching the RAM to another slot may also be beneficial. Then, after analyzing your computer, reboot it to determine whether the issue message remains.

If you hear any loud clicking noises, it could be a sign of a failing hard drive, which is one of the many reasons for the kernel data inpage problem. This option entails replacing the hard disc after backing up your data to a secure, off-site location.

This error message could be caused by hardware or peripheral devices. First, make sure your computer is turned off and that all hardware peripherals are plugged in. If your device does not crash after rebooting, reconnect each device one by one. If a specific device appears to be the source of the problem, unplug it or replace it.

If, after rebooting your device, the hardware doesn’t appear to be the source of the problem, rule out this possibility and proceed down the list.

6. Update Device Drivers

If you keep getting the Kernel Data Inpage Error, the issue could be with your drivers. Obsolete or corrupted drivers can cause this issue, so updating all of your drivers is recommended to resolve the problem.

To update your chipset drivers, go to the website of your motherboard’s manufacturer. For your motherboard, get the most recent chipset drivers. Check if the error persists after updating your chipset drivers.

Other drivers may be creating this issue, in which case you should update all of your PC’s drivers to resolve the problem. The problem should be settled once you’ve updated all of your drivers.

  • Select ‘Device Manager’ from the list by pressing the Windows+X key.
Open Device Manager
  • Right-click on the hard disc after expanding ‘Disk Drives.
  • To see if the device is working correctly, select ‘Properties.
hard disk Properties
  • Hard disc drivers should be reinstalled or updated.
  • If the driver isn’t working correctly, go to the ‘Driver’ page and click ‘Uninstall.’
  • To install the most recent driver update for the installed hard disc, click ‘Update Driver.’
Update Driver
  • To fix the Kernel Data Inpage Error, look for and update hard drive drivers.
  • Restart the computer after installing or updating the drivers.

7. Uninstall Incompatible Software

The Kernel Data Inpage Error 0x0000007a may occur if some freshly installed software or third-party programs are incompatible with the PC. To check if the Kernel Data Inpage Error may be resolved, uninstall the suspect applications.

To find out which software is causing the Kernel Data Inpage Error, uninstall recently installed software one at a time.

  • Press Windows + R and type the “control panel” in the Run window to uninstall programs. 
  • Navigate to Control Panel, Programs, and lastly, Programs and Features.
uninstall recently installed software
  • Uninstall any incompatible or corrupt third-party applications.
Remove it from the Control Panel
  • Check the software’s “Installed On” date and uninstall it.

8. Run SFC and DISM scan

The Kernel Data Inpage issue might be caused by file corruption, and you’ll need to run a few scans to fix it.

SFC scans are frequently sufficient to resolve file corruption issues. To run an SFC scan, go through the steps below:

  • Choose Command Prompt (Admin) from the menu by pressing Windows Key + X. you can also use PowerShell (Admin).
  • To execute it, type SFC /scannow into Command Prompt and hit Enter.
SFC /scannow
  • The SFC scan will now begin. Do not interrupt this scan since it may take up to 15 minutes.
scan and correct faults in your Windows system

If the problem persists after doing the SFC scan, I recommend running a DISM scan as well. Follow these steps to do so:

  • First, as an administrator, open Command Prompt.
  • To launch it, type “DISM /Online /Cleanup-Image /restoreHealth” in Command Prompt and hit Enter.
  • Do not stop the DISM scan because it can take up to 20 minutes or longer.
  • Check if the problem reappears after the DISM scan is completed.
  • If you were previously unable to run an SFC scan, try it again to see if it resolves the issue.

9. Reboot Windows In Safe Mode

Safe Mode in Windows is convenient for troubleshooting computer hardware and software issues. If none of the preceding solutions successfully resolve Kernel Data Inpage Error Windows 10/8/8.1/7, consider the following tips.

Using the Start menu, start Windows in Safe Mode:

  • To restart your computer, go to Start, then Settings ⇨ Update & Security ⇨  Recovery ⇨  Restart Now.
Update & Security
Recovery ⇨  Restart Now
  • You can click Troubleshoot ⇨  Advanced Options ⇨ Startup Settings ⇨  Restart after entering Windows RE (Recovery environment).
  • You can now select one of the three Safe Mode options in the Startup Settings box.

Using MSConfig, start Windows in Safe Mode:

  • To launch the System Configuration window, press Windows + R, type MSConfig in the Run window, then hit Enter.
  • Select Boot and Safe Boot from the menu. Select a chosen mode and then click OK.
  • Your PC will boot into Safe Mode after you click Restart in the pop-up window.
  • This method will force your computer to start in Safe Mode every time you turn it on.

Using the F8 function key, start Windows in Safe Mode:

  • In MS Windows, you can turn off the computer and restart it while pressing the F8 key repeatedly during the starting process.
  • There are three Safe Mode options once you see Advanced Boot Options: 
    • Enable Safe Mode,
    • Enable Safe Mode with Command
    • Enable Safe Mode with Networking
  • To choose a safe mode choice based on your own need to boot Windows in Safe Mode, press F4, F5, or F6.
  • Because Windows 10 and Windows 8/8.1 start up quickly, you may not have time to press the F8 key. 
  • However, to cure Kernel Data Inpage Error in Windows 10 or 8, you can use one of the two techniques listed below to start Windows in Safe Mode.

10. Restore BIOS Settings to Default

Kernel Data Inpage Error can also be caused by BIOS changes, misconfiguration, and improper settings. To see if BIOS settings are the source of the error, perform the following procedures to restore default BIOS settings:

  • Turn the system off. Then, as the system begins to boot, press the BIOS key, generally F2 or Delete key, repeatedly.
  • The BIOS (Firmware) settings will be accessed.
  • To restore BIOS setup, go to BIOS Settings and select ‘Setup Defaults’ or ‘Reset to Default’ (or a similar option).
  • Restart the machine once the BIOS has been reset to see if the Kernel Data Inpage Error has been fixed.


Kernel Data Inpage Error is a BSOD error code caused by corrupt hard disc and RAM issues. When not appropriately resolved, it can result in severe data loss.

I hope the ten remedies presented in this post might assist you in resolving the Windows Blue Screen problem.

You will be able to fix the Kernel Data Inpage Error with the given remedies. If so share our page to fix Kernel Data Inpage faced by others.

Frequently Asked Questions

What is Kernel_Data_Inpage_Error?

A kernel panic (abbreviated as KP) is a safety measure adopted by an operating system’s kernel. It detects a fatal internal error from which it cannot safely recover. Continuing to run the system will result in a higher chance of severe data loss.

Why does my computer keep getting a blue screen?

Problems with your computer’s hardware or issues with its hardware driver software are the most common causes of blue screens. For example, when Windows meets a “STOP Error,” a blue screen appears. Windows will crash and stop running as a result of this severe failure. At that moment, the only thing Windows can do is restart the computer.

What causes Kernel_Data_Inpage_Error?

If your Mac restarts unexpectedly, it’s because of a kernel panic. You’ll receive a notification stating that your machine restarted due to a problem. Faulty software is the most likely cause. Damaged or incompatible hardware, such as external devices connected to your Mac causes a kernel panic.

What does kernel error mean?

A BSOD (blue screen of death) error is Kernel Data Inpage Error. The requested page of kernel data from the paging file was not read into memory, as indicated by this bug check. In plain English, this means that Windows is having difficulty reading from memory.

Recommended Articles

Meet the Author

Abdul Rahim has been working in Information Technology for over two decades. Learn how Abdul got his start as a Tech Blogger , and why he decided to start this Software blog. If you want to send Abdul a quick message, then visit his contact page here.