There are more than 500 BSOD error codes; however, the Critical Process Died Stop Code stands out enough to be noticed. Subsequently, it will technically crash and show you this kind of shown error on your Windows 10.
In reasonableness, BSODs are significantly less normal in Windows 10 than in past variants of the OS. However, they are as yet irritating when they occur. We’re simply gathering some error information, and afterward, we’ll restart for you.
A few computers at any point enter the circle of ceaseless rebooting because of “Critical Process Died” without fail. Losing the particular stuff and things you were dealing with is not worth the worry.
The connected theme – Critical Process Died continues to restart can additionally be found on the web. This error ideally happens after a Windows 10 system upgrade or the establishment of another Windows in PCs.
What is the CRITICAL_PROCESS_DIED error?
The majority of BSODs are caused by a vital process that abruptly stops. Critical Process Died is a term that refers to when a critical system process dies while also displaying its bugs, such as error code 0x000000EF or a blue screen error.
The reason is simple at its most basic level: a foundation mechanism that Windows relies on has become corrupted. The Critical_Process_Died error indicates that a critical system process has died with the error number 0x000000EF.
If a critical system can’t run as expected, the operating system will run into certain difficulties. Then if a critical system process neglects to run, the operating system will not boot up. It could occur while gaming, logging in to your PC, opening a certain app, or waking up your system from sleep.
Why is this Critical Process Died error message displayed on my computer?
There are not many Windows errors that ideally sound more cataclysmic than a “critical process” BSOD. The Critical_process_died issue is fundamentally caused When a vital portion of Windows detects the knowledge has been changed when it shouldn’t, Critical process died issue occurs.
This component could be a bad driver, a memory problem, or something else. Problems with drivers, corrupted system files, a bad system update, and so on because they would all be able to affect your Windows system execution to cause a BSOD error like this.
Often, this error happens out of nowhere when clients are dealing with their PCs. It might just take one corrupted document to cause a system process to come up short.
How do I fix the Critical Process Died error in Windows 10?
Because there are many possible causes, you’ll need to go through several BSOD investigation stages. The accompanying arrangements address these issues, from ineffectively composed gadget drivers to harmed system documents to infections to flawed capacity gadgets.
We should look at how to address Windows 10’s Critical_Process_Died stop code. Windows 10 Critical_Process_Died on boot is a typical issue discussed in numerous gatherings and articles, and we have tracked down some valuable answers to fix it as follows.
Solution 1: Restart Computer in Safe Mode
As a rule, This issue may render your workspace or machine unfit for use, necessitating a safe mode restart. You generally get this issue each time you restart the computer. For this situation, you can restart the computer in protected mode.
This is a serious fast way to turn on the computer’s Windows system, which may prevent you from encountering this error during the starting process. Squeezing the F8 or Shift + F8 keys before starting up most computers will bring up the Advanced Boot Options Menu.
To restart your computer in safe mode:
Restart Windows 10.
Press Shift + F8 before Windows 10 begins stacking with the goal that you make it start the recuperation mode, from where you can boot into Safe Mode.
Continue to press the keys until you show up at the recuperation. Attempt both F8 and Shift+F8 on isolated restarts in the event that one doesn’t work for safe mode.
Then, to restart your computer, go to Advanced Boot Options and select Safe Mode as the boot mode.
- You can also enter Safe Mode differently.
- You can also use Safe Mode with Networking, although this isn’t recommended because your wifi chipset’s driver could be the culprit.
- Kindly utilize an establishment plate or restart your PC a few times to boot to WinRE. Then, click Troubleshoot → Advanced choices → Startup Settings → Restart.
- You will get the accompanying screen capture; press the relating key in the command to enter Safe Mode.
When you’re in WinRE, click Troubleshoot.
Click on Advanced Options after that.
Then click Startup Settings.
Lastly, click on Restart. When your computer reboots, you will return to WinRE. Explore the Startup Settings menu as we’d done in stages 2-4.
Here, you’d find various restart choices.
Solution 2: Upgrade All Drivers
After you’ve restarted your computer in Safe Mode, check to see if there are any issues with your device drivers. The drivers’ bugs are likewise a justification for fixing critical_process_died error, so it’s anything but a reasonable alternative to keep every one of your drivers updated for the system’s smooth working.
Many blue screen problems, such as the 0x000000ef error, can be caused by equipment or drivers. Kindly follow the rules recorded beneath:
You can go into Device Manager by squeezing Win + X.
Begin checking all drivers. If you discover a driver that shows a yellow exclamatory imprint, it implies the driver is flawed.
This driver must be uninstalled and reinstalled in this case.
Right-click the “Windows” symbol and snap on “Device Manager”.
The Device Manager window will open, right-click on all drivers individually and click on “Update Driver”
What’s more, it is conceivable that the equipment drivers are not, at this point, viable with your Windows system after an upgrade. Moreover, update every one of the drivers in a steady progression.
You must upgrade all drivers by right-clicking on a driver and selecting Upgrade Driver Software. This is a valuable fix Critical_Process_Died for Windows 10.
Solution 3: Use SFC /Scannow
The corrupt documents in the system became the principal justification for the critical process that died in Windows 10 error. You can use the SFC/Scannow command to check the record system for this situation.
Subsequently, examining these corrupt documents in the system helps the client fix them.
If this System File Checker finds that wrong documents overwrite the ensured records, it will remove the right system record from the system record reinforcement and supplant the mistaken document.
This command is valuable for fixing system records, and you can follow the means underneath:
Open the command window, right-click Command Prompt and select Run.
Type SFC/scannow and press Enter key.
When Verification comes to 100%, if there are no corrupted system documents, you can get a note “Windows Resource Protection didn’t discover any respectability infringement”.
You can likewise attempt:
Enter the “Start” catch and quest for “Windows PowerShell”.
Presently make right-click and click on “Run as Administrator”.
A blue window will be noticeable; then, at that point, type “SFC/scannow” and press “Enter”.
At the point when the process is finished then, the system will find every one of the corrupt documents and will fix them.
Solution 4: Run DISM to Repair Corrupted System Image
One approach to address this error is by fixing the system picture. If the SFC/scannow command fails to resolve the Windows 10 blue screen Critical Process Died, you can use DISM to repair and correct the Windows system picture.
Windows furnish its clients with the element to reestablish the system picture by playing out a bunch of guidelines on Command Prompt. Deployment Image Servicing and Management, also known as DISM, is a command-line application included with Windows 10. Several clients have recommended this method.
- Click on the “Start” catch and search “Command Prompt”.
- Then, open the command prompt.
- Right-click on the alternative and pick “Run as Administrator,”.
Then, type following the command lines as shown below:
Dism/Online/Cleanup-Image/CheckHealth
Dism/Online/Cleanup-Image/ScanHealth
Dism/Online/Cleanup-Image/RestoreHealth
Furthermore, the system will begin reestablishing.
Solution 5: Perform a Clean Boot
Clean boot is a specific kind of boot succession that permits the stacking of important documents in the memory and helps decrease startup time.
If you experience BSOD Critical_Process_Died Windows 10, you can decide to play out a clean boot in Safe Mode. It helps fix critical_process_died windows 10 errors as it kills all additional software and services.
Merely just hit Win+R to enter the Run box and subsequently type MSConfig to access the System Configuration window.
Then, at that point, pick Selective startup and Load system services in the System Configuration window.
Snap-on “Services” as displayed in the picture beneath and afterward check “Conceal all Microsoft services”.
Finally, verify to Disable all Microsoft services and click the Disable all catch.
Presently, click on “Startup” and “Open Task Manager”.
Right-click on every one of the applications in a steady progression and snap on the “Debilitate” choice or snap on the “disable” button at the base
Solution 6: Uninstall the Latest Software
There may be some corrupted system files present in your system. You may have introduced some software with infections on your computer.
There might be a likelihood that the system may break down given new updates, and accordingly, the client should eliminate these new updates.
Maybe the infection assault technically caused this error, so it’s better to uninstall and delete the most recently introduced software.
Solution 7: Restore to the Previous Point
System Restore is a productive method to fix errors. On the off chance that the error has shown up as of late, you can utilize the made system restore highlight to restore to its past status.
To fix critical_process_died windows 10 error, the system file is restored to its prior rendition. Ideally, it would be best to execute this under Windows Recovery Environment and select System Restore from the Advanced Options menu.
Click on the “Start” catch and quest for “Restore”.
Presently, click on “create a restore point.”
The Restore point window will open. Snap-on “System Protection,”.
Presently, click on “configure “.
Click “Turn on system protection” and assign the memory for system rebuilding by moving the slider. Click “Apply” and afterward, “ok.”
Select the restoration point that you need to utilize on the machine.
You could likewise decide to Scan for influenced projects to sort out which applications would, at this point, don’t be available.
Click the Next button.
Click the Finish button.
Solution 8: Use MiniTool Partition Wizard When There Are Bad Sectors
Another normal conceivable reason is that there could be terrible circle blocks. Different outsider software permits the client to discover the terrible areas in the memory handily.
On the off chance that there are terrible areas in your hard drive, Windows stop code Critical_Process_Died on startup may occur. These areas are either corrupted or are confronting some error, so this software finds these areas and assists them with sorting them out.
For this situation, you need to check whether your circle has terrible areas. The software utilized in the process is Partition Wizard.
Open the software, select the partition, and click the “surface Test” choice.
The software will “start” checking the partition, and if the system has no issues, it will appear on the screen.