12 Fixes For Faulty Hardware Corrupted Page Error On Windows

The BSOD (Blue Screen of Death) error “Faulty Hardware Corrupted Page” is a complex stop code. Your computer displays the blue screen of the death message. It can hinder getting vital work done. A variety of sources can cause this issue. A variety of sources can cause this issue. It includes malfunctioning hardware and corrupted pages.

faulty hardware corrupted page

You could be perplexed by the defective hardware corrupted page error. To comprehend it, you must first learn its causes. We’ve listed the most prevalent causes of this error.

  • A program or application that has been installed or uninstalled incorrectly.
  • The hard disk has been damaged or corrupted.
  • Having issues installing a Windows operating system.
  • A recent software modification produced a registry corruption in Windows.
  • A virus or malicious software that corrupted system files.
  • Device drivers that are out of the current corrupted or poorly configured.

Before You Begin With The Fixes, Follow.

Faulty hardware could be the source of the issue. So, if you’ve just added new hardware to your computer, it’s a good idea to take it out and see if the BSOD still occurs. There’s a potential your computer is infected because of the problem, which faulty drivers could cause. 

It is advised to run a thorough system scan before attempting the solutions listed below. Download an antivirus program if you don’t already have one on your computer. Malwarebytes is a well-known and influential anti-malware program.

Methods To Fix Faulty Hardware Corrupted Page Error On Windows 10

  1. Disable Fast Startup
  2. Remove External Peripherals
  3. Run Check Disk Utility
  4. Roll Back Device Driver
  5. Check RAM
  6. Run Windows Memory Diagnostic Tool
  7. Update BIOS Or UEFI
  8. Run System File Checker & DISM Tool
  9. Update Device Drivers
  10. Clean Dust from Computer 
  11. Reset your System Operating System
  12. Remove Problematic Applications

1. Disable Fast Startup

For many users, turning off rapid startup works as well. This option, in essence, speeds up the startup of your computer compared to a standard beginning. It can cause issues since your drivers or programs may not have enough time to load correctly due to the quick launch.

  • Click the Search icon, then put “control panel” into the search box.
  • Click All Control Panel Items after expanding the Control Panel selections.
  • Select the Power Options option.
power options
  • Select on the “Choose What the Power Button Do” at the left bar menu.
Choose What the Power Button Do
  • “Change settings that are currently unavailable,” the hyperlinked text. You’ll be able to adjust the Shutdown options now.
Change settings that are currently unavailable
  • Turn off Fast Startup by unchecking the box next to it.
Turn off Fast Startup
  • Save your changes.
  • Check to see if the error has been resolved by restarting your computer.

2. Remove External Peripherals

Suppose you have many external peripherals attached to your computers. Such as printers, scanners, and speakers. Restart Windows 10 after disconnecting them. (Do not remove any input devices, such as a keyboard or mouse.)

If that doesn’t fix the BSOD issue “Faulty Hardware Corrupted Page,” reconnect each peripheral. Determine which device is the source of the problem one by one. After that, update or roll back the drivers for that specific device.

3. Run Check Disk Utility

The Check Disk Utility (CHKDSK) is a program that can fix disc issues on your computer. Give it a try to fix the “faulty hardware corrupted page.”

  • Open a Windows PowerShell console with elevated privileges.
  • Press Enter after typing chkdsk c: /f (replace C with the drive letter).
chkdsk c: /f
  • Windows PowerShell will prompt for permission to launch the Check Disk Utility during the next system reboot. Press Enter after typing Y.
  • Your computer should be restarted.
  • Allow the Check Disk Utility to complete its scan and repair of drive faults. It could take up to an hour to finish this task.

4. Roll Back Device Driver

New hardware drivers can conflict with the operating system. It results in system problems and errors. Microsoft is well aware of this. You have the option to roll back a recent device driver update if the “Faulty Hardware Corrupted Page” BSOD appeared.

  • Pick “Device Manager” from the Power User Menu.
  • Expand the device category (for example, Display adapters) and right-click the device you want to revert.
  • Choose Properties.
driver properties
  • Toggle over to the Driver tab.
  • Choose the Roll Back Driver option.
roll back driver
  • Your computer should be restarted.

5. Check RAM

Many customers have found that inspecting the RAM and removing or replacing the defective RAM cured the problem. A faulty RAM was found in the majority of the cases. As a result, it’s a good idea to check your RAM as well.

The first thing you should perform is to remove the RAM and clean it. Make sure there’s no dust in the slots before reinstalling the RAM. Make sure the RAM is connected correctly. After that, turn on the system to see whether the problem still exists.

If the issue has been resolved, consider yourself fortunate. The troubleshooting process was straightforward.

6. Run Windows Memory Diagnostic Tool

For memory testing, you can utilize Windows’ own built-in memory diagnostic tool. It isn’t the most accurate tool for memory testing, but it does provide some diagnostics for your RAM. So, if you don’t want to rush immediately to the Memtest or don’t have a lot of time, it’s worth a shot.

To use the “Windows Memory Diagnostic” utility, follow the steps below.

  • Press Windows + S to open up the Windows Search box. Then, in the search box, type windows memory diagnostic and click Open.
  • Select Restart now and run a troubleshooting check (recommended). At startup, your machine should immediately restart and launch Windows Memory Diagnostic.
  • Wait for Windows Memory Diagnostic to complete its memory-related fault check. After that, your machine should continue to load Windows 10.
  • If Windows Memory Diagnostic doesn’t show you the results, use the Event Viewer in Windows 10.
  • Choose Event Viewer from the Power User Menu.
  • Select System Logs from the left panel’s Windows Logs.
  • Open the Action menu and choose to Find from the drop-down menu. Then, in Windows Memory Diagnostic, search for memory diagnostics to find the results. If you notice any issues, your computer’s RAM must be replaced.

7. Update BIOS Or UEFI

The firmware that makes your PC work is the BIOS (Basic Input/Output System) or UEFI (Unified Extensible Firmware Interface). An outdated BIOS/UEFI can cause hardware-related issues. The “Faulty Hardware Corrupted Page” BSOD appears repeatedly.

I copied the updated firmware file on a flash drive after downloading it. To enter the BIOS, restart your computer and then press the key. The Del or F12 key is frequently used for this. For more information, consult your motherboard’s manual.

Although each BIOS is different, there should be an option for updating or flashing the BIOS. You should choose the firmware file from your USB drive. The flashing process should be finished after you’ve completed all of the necessary confirmations.

“Q-flash” is the name of the utility on our Gigabyte board. UEFI screenshots aren’t available when Q-flash is running. However, the software simply asks for the location of the latest firmware file before flashing the BIOS.

8. Run System File Checker & DISM Tool

You can fix this problem with built-in Windows repair operations like SFC and DISM. These commands will repair your Windows corrupted drivers and data. Follow the steps below to run these commands properly.

  • Hold down the Windows key while pressing X, then select “Command Prompt (Admin) or PowerShell (Admin). “
  • Press enter after typing the following command.
    • SFC /scannow
  • After the operation is completed, reboot your computer.
SFC /scannow
  • Wait a while and see if the problem persists. If the problem persists, you’ll need to use the DISM command.
  • Reopen Command Prompt as an administrator, then type and click enter the following command.
    • DISM /Online /Cleanup-Image /RestoreHealth 
  • Wait for the process to complete before checking to see if the problem still exists.

9. Update Device Drivers

Various system-related incompatibilities cause Blue Screen. Incorrectly configured device drivers also cause the “Faulty Hardware Corrupted Page” BSOD error. As a result, it’s a good idea to keep faulty drivers up to date. Start by installing any pending Windows Update driver updates.

  • To update your drivers, follow the instructions outlined below.
  • Press R while pressing down the Windows key.
  • Press Enter after typing “devmgmt.msc.” It will open the device manager. 
  • Double-click Display Drivers to open it.
  • Select Update Driver Software from the context menu of your Display Device.
update drivers
  • Select Automatically search for new driver software.
  • Wait for your computer to look for the latest driver version of your device driver.
scan new drivers
  • You should be able to update the driver without difficulty.
  • Close the Driver Software Update window.

10. Clean Dust from Computer 

Dust and particles accumulate in the inside parts of your computer. It prevents them from functioning correctly. The “Faulty Hardware Corrupted Page” BSOD can be fixed by removing, cleaning, and reseating equipment.

  • Unplug your computer from the electrical socket or surge protector and turn it off.
  • Dust the interior components of your computer with compressed air in short spurts. Maintain a distance of at least a couple of inches from the surface.
  • With a can of compressed air, clean the dust off your case fans. While blowing compressed air onto the fan, keep your finger on it to keep it from spinning.
  • Using a can of compressed air, clear the dust from the power source. Make sure you clean the filter as well.
  • Clean the fan and heat sink on your processor.
  • Moisten a lint-free cloth with isopropyl alcohol to remove the thermal grease. 
  • Finally, use compressed air to clean all of the computer’s ports and rubbing alcohol and a cotton swab to wipe all of the external vents.

11. Reset your System Operating System

If none of the procedures listed above has worked for you, we consider resetting your operating system. Ensure you made a complete backup of all your crucial data and files before proceeding. As a result, below are the procedures to reset your Windows operating system. It may help to solve the “Blue screen error.

  • Select the Search button.
  • Type “settings” into the search box.
  • Select “Update & Security” after you’ve entered the Settings panel.
  • Select Recovery from the left bar menu.
  • Under the Reset, this PC section, click the Get Started option.
  • For resetting your computer, you have two alternatives. Select the option to remove everything.
  • If you choose this option, you will lose all of your apps and data. So, before you go any farther, preserve them.
  • You’ll be asked to clean the hard discs. We recommend choosing Just Remove My Files over the other option because it is faster. If you still want to use the computer after correcting the issue, select this option.
  • Click the Reset button when you see the popup that says, “Ready to reset this PC.”
  • Windows will be installed once you’ve rebooted the system.

12. Remove Problematic Applications

Third-party apps frequently cause Blue Screen of Death problems. As a result, you must locate and eliminate the offending software.

Almost any software might generate this error. Identifying the offending application can be challenging at times.

Typically, your antivirus program or firewall is at blame for these issues. Remove all third-party antivirus software from your computer.

Keep in mind that Windows 10 has Windows Defender, which acts as an antivirus program. Your PC will not be entirely unprotected if you deactivate all third-party antivirus software.

It’s possible that uninstalling your antivirus won’t solve the problem. When you remove antivirus, tend to leave specific files and registry entries behind.

I strongly advise you to delete your antivirus. Also, any residual files associated with it using specialized removal software.

Many antivirus firms have dedicated uninstallation tools available on their websites. Ensure to download one for your antivirus.


The remedies above should have fixed your desktop device’s “Faulty Hardware Corrupted Page” BSOD. Most likely, the RAM is to blame when you see a hardware corrupted page error. In any case, give a shot at the above methods to fix the “Hardware corrupted page” error in windows 10.

Frequently Asked Questions

What causes faulty hardware corrupted?

A system driver that is obsolete, inaccurate, or corrupt might also produce this error. You should double-check that all of your devices use the correct driver and update those that aren’t.

What is the “critical process died” error in Windows 10?

The majority of BSODs are caused by a vital process unexpectedly stopping. If you’ve been a victim, you’ll notice the error code 0x000000EF on the blue crash screen. A damaged background process causes the problem that Windows relies upon.

What is a “faulty corrupted hardware page”?

A program or application that has been installed or uninstalled erroneously. A virus or malicious software that corrupted system files. Having issues installing a Windows update. Device drivers that are out of the current corrupted or poorly configured.

What are the hardware errors?

A hardware fault occurs when a computer system’s hardware component fails. A rectified error is a hardware error condition that the hardware has fixed. It is done by the time the operating system has been alerted of its presence.

Meet the Author

Abdul Rahim has been working in Information Technology for over two decades. Learn how Abdul got his start as a Tech Blogger , and why he decided to start this Software blog. If you want to send Abdul a quick message, then visit his contact page here.