12 Best Fixes For Error Code 0x80070490 Issue

When you try installing or obtaining updates from Microsoft or the Windows update site, the error code 0x80070490 (Windows update error) occurs. Corrupted files in Component-Based Servicing (CBS) or System Component Store could be the source of the issue. These two services are essential for Windows update activities.

12 Best Fixes Error Code 0x80070490 Issue

As a result, if their files are corrupted or damaged, the Windows Update component may become useless, resulting in this error. I will guide you on fixing Error Code 0x80070490 on Windows using some simple remedies in this guide.

What Causes the Windows Update Error 0x80070490?

Various factors can cause the 0x80070490 error number in Windows. The three most common explanations for this problem on your Windows PC are mentioned below.

  • The initial reason for the 0x80070490 error code is antivirus program interference, disrupting the system’s operation.
  • When the antivirus software isn’t installed, a virus can infect the Windows PC or laptop, resulting in this update problem.
  • The error code 0x80070490 might occur when files in the SoftwareDistribution folder get corrupted.

How To Fix Error Code 0x80070490 In Windows 10?

  1. Manually Reset WU Components
  2. Run A System File Checker And DISM Scan
  3. Disable 3rd Party Antivirus Suites
  4. Update Windows Manually 
  5. Create New User With Administrator Privileges
  6. Check Your Privacy Settings
  7. Run Windows Update Troubleshooter
  8. Configure Windows Update Services
  9. Delete Windows Update Folder
  10. Repair Windows
  11. Perform System Restore
  12. Enable The Built-In Administrator Account

1. Manually Reset WU Components

Manually resetting the Windows Update Components is time-consuming, but it usually succeeds in deleting any undetected corrupted files that prevent updates.

Using Command Prompt, this technique entails manually disabling critical WU services. Then, to force Windows to generate the necessary update components, we’ll rename the SoftwareDistribution and Catroot2 directories.

The Windows Update process requires the catroot2 and SoftwareDistibution directories. The catroot2 subdirectory is responsible for storing Windows Update package signatures whenever you update via Windows Update. Windows will create a new folder and delete any corrupted data from the upgrading process if you rename the catroot2 folder.

  • Search for “cmd” in the Start bar in the bottom left corner. Then, right-click Command Prompt and choose Run as administrator from the context menu.
  • Stop the BITS, Cryptographic, MSI Installer, and Windows Update services in the elevated Command Prompt.
  • In the Command prompt, write the following commands, pressing Enter after each one:
    • net stop wuauserv
    • net stop cryptSvc
    • net stop bits
    • net stop msiserver
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
  • Let’s rename the Catroo2 and SoftwareDistribution folders now that the services have been disabled. The Command Prompt is also the quickest way to do it. 
  • Copy and paste the commands below into your elevated Command Prompt window, pressing Enter after each one:
    • ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
    • ren C:\Windows\System32\catroot2 Catroot2.old
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 Catroot2.old
  • Re-enable the services disabled before. In Command Prompt, type the following commands and hit Enter after each one:
    • net start wuauserv
    • net start cryptSvc
    • net start bitsnet start msiserver
net start wuauserv
net start cryptSvc
net start bitsnet start msiserver
  • Close Command Prompt, reboot the computer and try to install the update again.
  • Now, check if Error Code 0x80070490 is fixed or not.

2. Run A System File Checker And DISM Scan

The built-in utility in Windows is usually helpful in fixing corruption issues associated with the Error Code 0x80070490. The System File Checker will do a registry scan and try to fix any corrupt registry files it finds.

See also  How To Screenshot On Acer Laptop: 6 Best Methods

The System File Checker is accessed through the Command prompt, but only if the user has administrator capabilities will the command operate.

  • Search for “cmd” in the Start bar in the bottom left corner. Then, right-click Command Prompt and choose Run as administrator from the context menu.
  • Type “sfc /scannow” into Command Prompt window and press Enter. This will start a system-wide search to look for faulty files.
"sfc /scannow

Check if the System File Checker thinks the CBS store is corrupted once it has finished scanning.

  • Then type the following Dism command and press Enter:
    • Dism /Online /Cleanup-Image /RestoreHealth
Dism /Online /Cleanup-Image /RestoreHealth
  • Close Command Prompt when you get a message indicating that the cleanup is complete.
  • To open a Run window, press Windows key + R. To open the Services window, type “services.msc” and press Enter.
  • Locate the Windows Update entry in the Services pane, right-click it, and choose Restart.
  • Repeat the procedure with Windows Module Installer when the service has been restarted.
  • After restarting both services, try updating again to see if the Error Code 0x80070490 problem persists.
  • Now, check if Error Code 0x80070490 is fixed or not.

3. Disable 3rd Party Antivirus Suites

It’s critical to double-check for software conflicts. WU (Windows Update) is intended to work with Windows’ built-in security solution (Windows Defender). Ensure the built-in antivirus solution is disabled if you have a third-party antivirus package installed to avoid software conflicts.

  • Even if Windows Defender is turned off, specific anti-malware programs take a long time to grant the necessary rights for the updates to run.
  • To ensure your antivirus isn’t the source of the problem, turn off real-time protection and the firewall.
Disable 3rd Party Antivirus Suites
  • Restart your computer and try again to install the update.
  • If the update is successful, you’ll need to reinstall your third-party antivirus or find a new one.
  • Now, check if Error Code 0x80070490 is fixed or not.

4. Update Windows Manually 

Another option to fix known issues is to update Windows. Windows Update is a program that allows you to update your computer. However, you can use the Microsoft Update Catalogue to manually download and install the update files because you can’t update the operating system regularly.

  • Look at the Windows Update History for Windows 10 or 11 and write down the most recent KB ID.
  • Search for and download the update from the Microsoft Update Catalog.
Update Windows Manually Microsoft Update Catalog
  • Be careful to select the file corresponding to your PC’s Windows architecture (32-bit or 64-bit).
  • To install the update, double-click the downloaded file.
  • Now, check if Error Code 0x80070490 is fixed or not.

5. Create New User With Administrator Privileges

  • Locate Accounts -> Other accounts in PC Settings. Add a new user account to the computer by selecting Add an account.
Create New User With Administrator Privileges
  • Click Edit next to the newly created account. On the Editor account stage, change the user type to Administrator. Click the OK button.
Create New User With Administrator Privileges
  • Log in with this new account, which has administrator access. All installed applications on your PC will be re-initialized and synchronized consistently.
  • Keep this account logged in and use the Start Screen to switch it to the original account.
  • Now that you’re back in your original account try installing the updates or programs that gave you an error.
  • Now, check if Error Code 0x80070490 is fixed or not.

6. Check Your Privacy Settings

Apps may be unable to access your email because of your Windows 10 privacy settings.

  • To access Email, Calendar, and People, go to Settings, Privacy, and then Email, Calendar, and People. After that, permit apps to access your email and calendar.
  • Restart your Mail app and try again to add the troublesome email account.
  • If the problem remains, restart your computer and give it another shot.

7. Run Windows Update Troubleshooter

Microsoft recognizes that Windows Update can cause various problems, so Windows 10/11 provides a built-in troubleshooter to assist you in resolving them.

  • Select Settings from the Start menu (or by pressing the Windows key).
  • Now, select System, then Troubleshoot (Windows 11) or Update & Security, then Troubleshoot (Windows 10).
  • Select Other troubleshooters (Windows 11) or Additional troubleshooters (Windows 10).
  • Windows Update then Run the troubleshooter (Windows 11) or Windows Update > Run the troubleshooter (Windows 10).
  • Once the Windows Update troubleshooter has loaded, follow the on-screen directions to resolve any issues that have been discovered.
See also  Copy and Paste Not Working In Windows 10? Try These 18 Fixes

8. Configure Windows Update Services

You must ensure that each Windows Update-related system service is operational.

  • To open the Services program, press Windows + R and type services.msc, then select OK.
services.msc
  • Select Properties from the context menu of Windows Update, Background Intelligent Transfer, and Cryptographic Services.
Background Intelligent Transfer
  • For all three services, make sure the Startup type is set to Running, and the Service status is Running (if not, pick Start).

9. Delete Windows Update Folder

Another reason for “Error code 0x80070490” is a faulty Windows Update cache. Delete the folder containing the cached files. The process entails using an elevated Command Prompt interface to conduct a sequence of commands.

  • To start Command Prompt with administrative credentials, go to the Start menu, type cmd, and select Run as administrator.
  • To disable the Windows Update service, paste the following command into the command prompt and hit Enter:
    • net stop wuauserv
  • To delete the Software Distribution folder, use the following command:
    • rmdir %systemroot%\SoftwareDistribution /s
  • To restart the Windows Update service, type the following command:
    • net start wuauserv

10. Repair Windows

If the first two techniques fail, it suggests an issue with the operating system itself, which can be fixed by “repairing.” Follow the steps in the section below:

  • Restart the computer after closing all open programs.
  • Wait a while after inserting the system DVD into the disk drive. If it doesn’t start on its own, attempt the following operations.
  • Click the “Start” button and type “G:setup.exe” into the search box. G is the DVD drive letter, although it might be another letter on your machine. Click Setup.exe in the search result.
  • Pick “Go online to obtain the latest updates for installation” from the Install Now menu.
  • If you’re asked for your Windows product key, type it in. Then, click Update in the dialog “Which kind of installation do you want?”.
  • When the installation is done, restart the computer to run Windows Update and install any updates that were not covered by the DVD.

11. Perform System Restore

System Restore is a feature that permits you to go back in time and undo modifications to your operating system. Consider it a “undo” feature for Windows’ most crucial features.

If the software was previously working correctly, the actions following should remove any registry issues and other OS modifications that could have produced the 0xe06d7363 error.

  • To open the Run command, use Windows key + R. To open System Restore, type rstrui and press Enter.
Perform System Restore
  • In the first window, select Next, and then select Show more restore points from the drop-down menu.
  • Click the Next button after selecting a restore point before the application malfunctions.
Perform System Restore
  • Press Finish and then Yes at the following prompt to begin the restoration procedure.
  • Your PC will restart automatically after the restore is complete.
  • The problem 0xe06d7363 should be gone after restoring your OS to the previous version you chose.

12. Enable The Built-In Administrator Account

The built-in administrator account can also be enabled.

  • To launch the Run dialogue box, press Windows + R.
  • To open the command prompt as an admin, type cmd in the text field and hit Ctrl+Shift+Enter. To provide admin access, click the Yes button.
  • Then hit the Enter key and write net user administrator /active: yes.
  • Close the Command Prompt window and reboot your computer. Attempt to log in to the administrator account when the computer starts up.

Fix Error Code 0x80070490 In Mail App

“Error code 0x80070490” frequently appears in the Windows 10/11 Mail program when establishing a new email account (e.g., Gmail or Outlook). The Mail problem can be resolved by using the tips and fixes below.

  1. Update mail Application
  2. Check Mail Privacy Settings
  3. Set Up The Calendar App
  4. Reset The Mail And Calendar App
  5. Reinstall Mail and Calendar
See also  19 Best Fixes When Windows 10 Can't Find WiFi Network

1. Update mail Application

The following step is to update the Mail application. That should solve any problems caused by “Error code 0x80070490.”

  • Start by going to the Microsoft Store.
  • In the lower-left of the screen, select Library.
  • To update Mail and other Store apps on your PC, select Get updates.

2. Check Mail Privacy Settings

Incorrectly configured email privacy settings can also cause the Error Code 0x80070490 Mail app error. Check to see sure everything is in order.

  • Open the Settings app on your phone.
  • Choose Privacy & Security, then Privacy, and finally Email.
  • Set the toggles next to Email access, Let apps connect your email, and Mail and Calendar to On.

3. Set Up The Calendar App

Another option for resolving “Error code 0x80070490” is to configure your email account in the Calendar app.

  • Open the Calendar app on your phone.
  • Choose Manage account from the Settings icon.
  • Add a new account.
  • Choose your email provider (for example, Outlook.com or Google) and add it using the onscreen instructions.
  • Open the Mail app after signing into Calendar, and the account should be listed in the sidebar.

4. Reset The Mail And Calendar App

You can also use Windows to repair Mail and Calendar. This should eliminate any problems caused by a faulty app installation.

  • Open the Settings app on your phone.
  • Select Apps, then Apps & Features from the drop-down menu.
  • Next to Mail and Calendar, scroll down and select Advanced settings.
  • Select Terminate > Repair from the drop-down menu.
  • You can reset Mail and Calendar to factory defaults if fixing doesn’t work. To do so, go to Terminate and then Reset.

5. Reinstall Mail and Calendar

In Windows, reinstall the Mail and Calendar apps. “Error Code 0x80070490” may be resolved with a fresh installation.

  • Open an elevated Windows PowerShell console, right-click the Start button, and select Windows Terminal (Admin) or Windows PowerShell (Admin).
  • To uninstall the Mail and Calendar apps, copy and paste the command below and run it:
    • Get-AppxPackage Microsoft.windowscommunicationsapps | Remove-AppxPackage
  • Start by going to the Microsoft Store. Looking for Mail and Calendar and installing them.
  • You swiftly resolved “Error code 0x80070490.” To avoid a recurrence of this problem, keep the operating system and all Microsoft Store apps up to date.

Conclusion

The error 0x80070490 in the Windows 10 Mail App indicates that your privacy settings block the Mail app from accessing your email. Make changes to your settings, update the app, and evaluate the results.

If the problem persists, try resetting your Mail and Calendar apps and scanning and repairing your system files with the SFC and DISM commands.

FAQs

What Is Error Code 0x80070490 When Setting Up Email?

When any process files linked with these directories get corrupted, users receive the error code 0x80070490. If you’re having trouble with the same error code, try the following solutions: Restart the Windows Mail program. Remove and reinstall the Mail App.

What Is Error Code 0x80070490 In Mail?

The error code 0x80070490 in the Windows 10 Mail App indicates that your privacy settings block the Mail app from accessing your email. Make changes to your settings, update the app, and evaluate the results. If the problem persists, try resetting your Mail and Calendar apps and scanning and repairing your system files with the SFC and DISM commands.

What Is Error Code 0x80070490 In Mail?

When any process files linked with these directories get corrupted, users receive the error code 0x80070490. If you’re having trouble with the same error code, try the following solutions: Restart the Windows Mail program. Remove and reinstall the Mail App. Run the System File Checker program.

Why Do I Keep Getting Error code 0x80070490?

The Error code 0x80070490 indicates that a file or process in the System Component Store or Component-Based Servicing is corrupted (CBS). Both services are in charge of managing and overseeing all Windows-related update procedures.