Blue Yeti is a popular brand that manufactures sound input and output devices like headphones, speakers, and microphones. They are well-known for their easy-to-use features and simple interface.
Popular video game streamers like DrLupo and Myth use the Blue Yeti microphone to stream. One of the most frequent problems faced by users with this mic is that the Blue Yeti mic is not recognized by the Windows 10 OS.
This can be a problem and thereby, block audio input for your computer. We found something that will interest you if your computer hasn’t recognized your Blue Yeti microphone yet.
What Are The Factors That Cause The Blue Yeti Not Recognized Issue On Your Computer?
There are two different factors that could be the cause of the Blue Yeti microphone not being recognized issue on your computer. They are stated below
- Connectivity issues
The microphone can be loosely connected because of hardware issues. The USB port may not have recognized the microphone. There are chances for the microphone to have hardware issues, which could prevent the microphone from being detected by the computer. You will not be able to put the mic to use until the Operating System (OS) detects the microphone insertion.
- Misconfigured microphone settings
Even if the microphone is perfectly functional, there are certain software-related conditions to be met before your Blue Yeti microphone can be used. Even after this, there are factors like the system volume and audio output devices, that can modify or stop input through the microphone.
Solutions To Fix Blue Yeti Not Recognized Issue On Your Windows 10 PC
These are the procedures that have helped Blue Yeti mic users get over the USB mic not recognized issue on their Windows 10 computers.
- Take A Look At The Blue Yeti Mic
- See If Your Volume Is Turned Down
- Check If The Microphone Is Switched On
- Check If The Blue Yeti Microphone Has Been Recognized
- Inspect The Microphone Connection
- Try Connecting The Blue Yeti Mic Into A Different Port
- Troubleshoot The System Audio
- Set The Blue Yeti Microphone As Your Default Audio Input
- Download Updates For Your Blue Yeti Drivers
Fixing The Blue Yeti Not Recognized Issue On Windows 10 Computers
Take A Look At The Blue Yeti Mic
There is a chance that your microphone hardware is damaged. This means that the microphone may not work on your computer. If you see signs of visible damage, try to get it exchanged or repaired.
A warranty will help you through this process. A foam filter and a stand can protect your mic from future damage. Make sure the mic cable is well-hidden as tugging at it by mistake can bring the hardware down.
See If Your Volume Is Turned Down
Another common attribute that almost all of us fail to notice is the computer or the OBS’s input volume level. The voice input is taken as much as this level is. The lesser the input volume, the lesser the broadcasted volume is.
This can be changed with the help of the volume buttons, input volume slider, or the system sound settings.
Check If The Microphone Is Switched On
A mic that has not been turned on cannot take in audio to send or record. Make sure that the microphone is switched on before you start talking into it. This applies to both hardware and software.
You will have to unmute your mic in the application that you’re using the mic with. You can simply push the Mute button, which is placed in the center of the Blue Yeti microphone.
Check If The Blue Yeti Microphone Has Been Recognized
It is very important for your computer to detect the device inserted into your computer as a microphone. Only after this, the OS will install the drivers, which are necessary for its functioning.
For checking if the microphone has been detected, go to the Devices and Printers settings in the Windows Control Panel.
Inspect The Microphone Connection
There is a chance that the detection problem can lie with the connection between the computer and the microphone. If this is the reason, you will have to take a look at the USB cable, pin, and ports on the computer.
Any of this connectivity hardware could be damaged or dusty. Try cleaning them with a dry cotton bud and see if it helps.
Try Connecting The Blue Yeti Mic Into A Different Port
The USB port which accommodates the computer could be faulty. This leaves us with only one thing to do – try another port.
Because the Blue Yeti microphone supports USB connectivity, you can try different ports on your computer or laptop.
Troubleshoot The System Audio
In the past, we have worked with troubleshooting aspects of the Windows 10 OS that produce output through the computer. However, voice input also uses the same troubleshooters as that of playing audio.
This saves a lot of time for you since this tool looks for the issue and comes up with a solution on its own.
The easiest method to run this troubleshooter is to right-click on the speaker icon and choose the Troubleshoot sound problems option. If you wish to take the scenic route, use the procedure below.
- Bring up the Windows Settings (Windows + I) using the keyboard shortcut or through the Start menu (Windows key).
- Go into the Settings tile named ‘Updates & Security‘. This is the option to gain access to the OS configurations.
- Click on the Troubleshoot tab, from the list of tabs on the left panel.
You might be shown a list of all the troubleshooters you have run before.
- If there are none, select the Additional Troubleshooters link. This link is positioned at the bottom of the page or on the right side, depending on the version of the OS.
- Among the newly displayed list of troubleshooters, locate the Playing Audio troubleshooter and click on it.
- From the expanded section, click on the Run Troubleshooter option.
- In the window that appears, choose the device that is faulty and select Next to proceed. You could be asked to make more choices.
- Wait for the process to come to an end, which shouldn’t take more than a few seconds. When you see the Apply this fix option. Click on it to solve the detected issue.
After the solution is applied for this issue, you should no longer have to deal with an unrecognized Blue Yeti microphone. There is no guarantee that the issue will not appear again after implementing this solution.
Set The Blue Yeti Microphone As Your Default Audio Input
Most audio devices have to be the default device for input or output to connect with the computer and function. Even when you troubleshoot the microphone, this is what the troubleshooter does for you most of the time.
To set Blue Yeti microphone as the default device for audio receiving, use this procedure.
- Right-click on the Speaker icon, which is located at the right end of the taskbar. This can also be positioned in the System tray
- In this pop-up menu, select the Sounds option.
- Open the Recording tab and find the Blue Yeti mic from the list of audio recording devices.
- Right-click the Blue Yeti mic and select Set as Default Device from the context menu.
- Click Apply and OK, at the bottom of the window, to save these recent changes.
Once the Blue Yeti is set as the default recording device, try talking into it. The bars on the right side of the microphone should go up and down when you talk. You can also test this in an OBS application.
Download Updates For Your Blue Yeti Device Drivers
Every hardware requires its drivers to be accepted by the computer. Only with this driver software can the devices function on the computer. Newer versions of this software can bring upgrades to the performance of the device.
This is the final solution to fix Blue Yeti not recognized on Windows 10 PC issue.
Blue has a dedicated interface called Sherpa to get Blue Yeti driver and firmware updates. You can use it to download the latest driver software and install them, without much effort.
Alternatively, you can get updates for the Blue Yeti driver software from the manufacturer’s website. The last option is to look for these drivers, manually.
Here’s how you can install the updated driver software onto your computer.
- Open the Windows Device Manager. This can be found as an option in the Quick Link menu (Windows + X) and can also be opened by executing the devmgmt.msc run command.
- Click on the Sound, Video, and Game controllers section.
This will expand into a list of the audio device drivers on your computer.
- Look for the Blue Yeti mic, that is connected to your computer and right-click on it.
- From the pop-up menu, choose the Update driver option.
- In the audio device driver update wizard, click on the Search automatically for updated driver software option.
- Your system will be scoured for updates for the Blue Yeti driver software. If there are available updates, they will be downloaded without prompting.
- Restart your computer to install these updates on your computer.
If the Blue Yeti microphone not recognized on Windows 10 issue hasn’t been fixed by now, your last resort is the Blue customer support. They should be able to give you a solution.
You can also consult with a service unit regarding the microphone. We hope this article helped you fix Blue Yeti on your Windows 10 PC. Happy Recording!