Blink Camera Not Working: 11 Easy Fixes

blink camera not working

When the Blink camera is not recording motion, it could be because the batteries may be low, or it might not be appropriately connected to the internet.

Blink cameras rely on battery power and must be connected to the internet to detect and record motion.

If your Blink camera not working correctly, try checking the batteries and ensuring that the camera is properly connected to the internet.

Reasons, Why Blink Camera Is Not Working?

There can be several reasons why your Blink camera isn’t working. It could be a problem with the power source, the internet connection, or the sync module.

If the power outlet is not working, the camera will not have any power and cannot function. If your camera is placed far from the sync module, this also could be a reason. 

If the internet connection stops working, the camera may not be able to connect to the Blink servers and will not be able to record or stream video. If the sync module is not working, then the camera will not be able to communicate with the other Blink cameras in your system and will not be able to record video.

Why Does My Blink Camera Keep Going Offline?

If your Blink Camera is repeatedly going offline, there are a few things you can try to reset the camera and get it working again. First, check to see if your Blink Camera is within range of your Wi-Fi router. If it’s far away, you might be required to move it closer.

Move the blink camera and sync module closer to wi-fi.

If that doesn’t work, try restarting your Blink Camera system by turning it off and back on again. If that does not work, you might be required to reset your Blink Camera by pressing the reset button for 10 seconds. Once you’ve reset the camera, it should start working again.

Why did my blink camera live view fail?

Your blink camera is reporting a live stream failure for various reasons. The absence of this feature could indicate several issues, from sporadic connectivity to old batteries. Here are a few causes of live feed failure on your blink camera.

Why did my blink camera live view failed?
  • Battery life is low. A warning notification on the screen informs you to turn LiveView off if your battery is getting low.
  • Incorrect settings have been made for the camera. To prevent the camera from saying “Live View Failed,” ensure your camera settings are accurate.
  • You’re making too many color or filter changes at once. It will say “Live View Failed” if you apply numerous filters or modifications to the same picture.
  • Too many apps are open at once, which may result in the camera app crashing while in LiveView mode.

How to fix the Blink camera not working?

If your Blink camera is not working, there are a few things you can try to fix it. First, you can reset your sync module or cameras. If that doesn’t work, try power cycling your Blink cameras by unplugging them from the power source and then plugging them back in.

If you’re still having issues, try moving your Blink cameras closer to the sync module since they may be out of range. You can also try resetting the sync module by pressing and holding the reset button for 10 seconds.

If none of these fixes are working, then, unfortunately, you may need to replace your Blink cameras since they may be defective. We have mentioned other camera troubleshooting spots as well:

Solutions to fix the Blink camera not working

  1. Reset the Blink Camera
  2. Reset the Blink Sync Module
  3. Check the LED Indicator Light
  4. Power Cycling the Sync Module
  5. Reset the Wi-Fi Router
  6. Try Another Power Source
  7. Adjust Intensity Settings
  8. Adjust Control Settings
  9. Replace your Blink camera’s batteries
  10. Adjust your Blink camera’s Sensitivity setting
  11. LED indicator light status

1. Reset the Blink Camera

You should attempt resetting the camera if connectivity problems are a regular occurrence. Frequently, that is all Blink requires to resume operating normally. The benefit of having a functioning security system again outweighs the inconvenience of factory resetting your Blink gadget.

Since blink cameras have different models, you can find the reset key on the rear side of the camera in most cases.

  • Locate the camera’s reset key first. Blink cameras have a reset button on the bottom of them close to the batteries.
Locate the camera's reset key first. Blink cameras have a reset button on the bottom of it close to the batteries.
  • The reset button should then be pressed for at least ten secs using a paperclip or pencil. (To do this, you’ll need a thin object to fit through the small hole.)
  • The LED lights should begin flashing red when the gadget has been fully reset.

If this does not resolve the issue, reset the module instead.

2. Reset the Blink Sync Module

Hold the reset key on the side of the module, near the USB port, till the light switches red to reset the module. It might take 15 to 30 seconds. The reset was complete when you observed one steady green light and one blinking light.

By doing this reset, the Sync Module will enter “set-up mode.” All linked cameras will turn off. You must uninstall and then reinstall your Sync Module in the Blink application to use your cameras once more.

Follow this procedure for removing and installing your Sync Module:

  • Tap the question mark icon on the Blink application.
  • Eliminate the “Sync Module” option.
Eliminate the "Sync Module" option.
  • Insert or scan the module’s model number.
Insert or scan the module's model number.
  • Select “Delete.”
Select "Delete."
  • Now, come back to the home panel and select the plus sign.
Now, come back to the home panel and select the plus sign.
  • “Blink wireless camera system” should be set.
"Blink wireless camera system" should be set.
  • Repeat the scan or entry of the module’s serial number.
Repeat the scan or entry of the module's serial number.
  • Choose your Blink device.
Choose your Blink device.
  • Toggle “Discover Device” on.
  • Then select “Join.”
Then select "Join."
  • Choose “Done.”
Choose "Done."

3. Check the LED Indicator Light

What color is the LED light on your device to begin with?

If it’s red, there are problems with the device’s connectivity. Check the signal of your device by logging onto your Blink app. Blink will have connectivity problems more frequently if it has fewer than three signal bars.

Check the LED Indicator Light

On the other side, if you notice a solid blue light, the camera is taking pictures now. The video feed may not be available when the camera is recording. This is a frequent thing with the system for various Blink camera models.

4. Power Cycling the Sync Module

Power Cycling the Sync Module

The Sync Module must reconnect to Wi-Fi by performing a power cycle on the device. The quickest approach for restarting your Blink is this one.

You only need to disconnect the Sync Module from the outlet, wait at least 10 seconds, and then plug it back in. Throughout this time, you should take out and then replace the batteries. It is time to fix the gadget with your network when it powers back on and blinks green or blue.

5. Reset the Wi-Fi Router

The wi-fi network may be at blame if you consistently experience connection problems. Evaluate your wireless network; if it shows 3 bars of signal strength, then it’s good to go; otherwise, reset it.

By pressing a key on your modem or briefly pulling it from the wall, you can reboot it. You should pause for it to reconnect after turning it back on.

Reset the Wi-Fi Router

Now, connect your camera to wi-fi. You’ll notice a difference straight away if your Wi-Fi is acting up! If the wi-fi is working properly after resetting, you must resolve issues with your blink camera.

Nevertheless, you might also consider relocating the router and Sync Module, so they are nearer. Instances of connection issues are more likely if these objects are too far away.

It might be possible that your blink camera is not properly connected to your wi-fi if the distance between both of them is too much. This means that the camera is not getting enough internet to work.

6. Try Another Power Source

Take off the batteries, then attach your camera to a USB power source with a micro USB connection. By doing this, you’ll be able to use your camera without any batteries.

Try Another Power Source

However, this fix might not suit you based on where you want the Blink camera to be. This method may still be worth trying because it will reveal whether the batteries are damaged or depleted of power.

7. Adjust Intensity Settings

In situations with a lot of brightness, the intensity setting can be helpful. The Blink camera will capture the light from nearby street lights or parked vehicles. Accessing the live view on your Blink camera is preferable to determine whether this setting needs to be modified.

8. Adjust Control Settings

You may manage the timing of the night vision feature activation using the Control setting. The default setting for the camera is auto, so whenever it becomes dark, it will switch on.

Adjust Control Settings

When night vision is turned on, it will be available at all times, including during the daytime. Even though motion has been detected, the camera won’t turn on if the Off setting is selected.

9. Replace your Blink camera’s batteries

A battery issue is probably to blame if your camera won’t power on. The battery capacity of Blink cameras is one of their primary selling factors. The camera itself uses little power.

The AA lithium-ion batteries that arrived with the camera have a 2-year shelf life. If you have not changed the batteries from the start, your batteries are dead. You can also charge them if you have used rechargeable batteries.

Replace your Blink camera's batteries

Naturally, it is always probable that the batteries develop a problem earlier. And if you think that’s the case, remove the batteries. Use AA lithium batteries in Blink cameras. Any label will also work.

10. Adjust your Blink camera’s Sensitivity setting

Adjusting the Sensitivity setting is another approach to fixing it. The camera sends motion alerts as a result of this. And it’s possible that you or someone else turned it off by mistake. The camera cannot detect someone because of this. How to change this setting:

  • Get your phone’s Blink app active.
  • Select the three-dot icon.
  • The sensitivity slider should be set to at least a 5.
The sensitivity slider should be set to at least a 5.

Avoid setting the Sensitivity level to its maximum. You’re likely to receive many false notifications if you do that. Even small items could be interpreted as human presence by your camera.

11. LED indicator light status

  • A red flashing light will appear when you switch on your Blink camera for the first time. This means you are configuring wireless connectivity.
  • On the right side of the cam front, a red LED light turns on when new batteries are inserted.
  • After the blue record lights turn off, the cam’s LED light Blinking red five or six times to indicate low batteries.
  • When the camera senses motion, a quick red flash will be shown.
  • Your Blink camera is on and taking pictures when a solid blue LED light appears on the device.
  • When the red LED is solid, connectivity issues are present.
  • When the Blink mini-camera is not online, a red light will flash on the device.


Blink security cameras have become a must in today’s life. People who wish to increase their home security and have remote access to their recordings must have Blink cameras with the Live View feature.

The Live View capability is susceptible to connectivity and hardware issues due to how the Blink cameras connect to and engage with the Sync Module.

If none of these solutions satisfy you, you should speak with Blink’s customer support. If you have any warranties, they can help you enforce them or offer to repair the device. A new camera system would need to be purchased in such a case.